Delft University of Technology OpenCourseWare https://ocw.tudelft.nl This RSS feed contains a list of all the open courses in TU Delft OpenCourseWare en-gb This content is licensed with Creative Commons BY-NC-SA ocw@tudelft.nl ocw@tudelft.nl 2016-10-28T09:38:36 2016-10-28T09:38:36 https://ocw.tudelft.nl/wp-content/themes/tudelftocw/img/logo.png 2016-10-28T09:38:36 TU Delft OpenCourseWare https://ocw.tudelft.nl en-gb Sustainable Energy: Design A Renewable Future https://ocw.tudelft.nl/courses/sustainable-energy-design-renewable-future/ https://ocw.tudelft.nl/wp-content/uploads/ewi_energyx_edx_header.png Dr.ir. Arno Smets https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2017-03-12T13:38:24 2017-03-18T22:13:46 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Treatment of Urban Sewage https://ocw.tudelft.nl/courses/urban-sewage-treatment/ Prof.Dr.Ir. Jules van Lier Dr. ir. Merel de Kreuk https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ 2017-03-12T11:01:17 2017-03-22T21:46:44 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Observation Theory: Estimating the Unknown https://ocw.tudelft.nl/courses/observation-theory-estimating-unknown/ https://ocw.tudelft.nl/wp-content/uploads/citg_ot1x_header2.jpg Ramon Hanssen Dr. ir. Sandra Verhagen Sami Samiei Esfahany 2017-01-28T22:32:06 2017-02-11T16:20:44 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Seismic Essentials in Groningen https://ocw.tudelft.nl/courses/introduction-seismic-essentials-groningen/ Groningen, a province in the northeast of the Netherlands, is experiencing earthquakes due to the extraction of gas. This phenomenon is called induced seismicity. But what is induced seismicity? And how can the risk to life safety and the consequences for the built environment be reduced? The Groningen situation is unique and for this reason, solutions for the built environment cannot simply be copied from abroad. To contribute to a basic understanding of the various topics in this field, knowledge lectures have been developed as Open Course Ware by a large number of scientists and practitioners. This Open Course Ware is initiated by TU Delft in cooperation with Arup, TU Eindhoven and TNO. This public and private initiative combines engineering, architecture and management perspectives. The 30 video lectures provide conceptual knowledge of seismicity and basic seismic concepts. This knowledge is then related to the different structures and their behaviour under seismic loading. Finally, in the last theme more procedural knowledge will be outlined, related to the multidisciplinary challenges in Groningen. https://ocw.tudelft.nl/wp-content/uploads/Seismic_banner.jpg Prof. Joop Paul Prof. Hans Wamelink https://ocw.tudelft.nl/programs/bachelor/architecture/ https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ 2017-01-27T12:00:35 2017-02-08T13:17:58 TU Delft OpenCourseWare Course en-gb text/html The Basics of Transport Phenomena https://ocw.tudelft.nl/courses/basics-transport-phenomena/ https://ocw.tudelft.nl/wp-content/uploads/transport.jpg Rob Mudde Peter Hamersma https://ocw.tudelft.nl/programs/master/applied-science/ 2017-01-17T10:35:32 2017-01-23T14:34:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Geoscience: the Earth and its Resources https://ocw.tudelft.nl/courses/geoscience-earth-resources/ https://ocw.tudelft.nl/wp-content/uploads/citg_geo101x_edx_header.jpg Prof. dr. Giovanni Bertotti https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ 2017-01-02T13:16:32 2017-01-10T14:57:19 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Scratch: Programmeren voor kinderen (8+) https://ocw.tudelft.nl/courses/scratch-programmeren-voor-kinderen-8/ https://ocw.tudelft.nl/wp-content/uploads/Scratch-banner.jpg Dr. Felienne Hermans https://ocw.tudelft.nl/programs/high-school/various/ 2016-11-15T20:26:32 2016-11-25T15:05:09 TU Delft OpenCourseWare Course https://ocw.tudelft.nl/courses/scratch-programmeren-voor-kinderen-8/ https://ocw.tudelft.nl/courses/scratch-programmeren-voor-kinderen-8/ nl-nl text/html Data Analysis: Building your own Business Dashboard https://ocw.tudelft.nl/courses/data-analysis-building-business-dashboard/ https://ocw.tudelft.nl/wp-content/uploads/ewi_ex103x_header.jpg Dr. Felienne Hermans https://ocw.tudelft.nl/programs/master/computer-science/ 2016-11-15T16:10:24 2016-12-15T15:35:35 TU Delft OpenCourseWare Course en-gb text/html Design Practice in Business https://ocw.tudelft.nl/courses/design-practice-business/ https://ocw.tudelft.nl/wp-content/uploads/Design-Practice-in-Business-banner.jpg Dirk Snelders Giulia Calabretta Christine De Lille Boris Eisenbart Erik Jan Hultink Roland van der Vorst Pinar Cankurtaran https://ocw.tudelft.nl/programs/bachelor/industrial-design-engineering/ 2016-11-13T13:04:05 2016-11-13T13:49:21 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html IMAGE | ABILITY – Visualizing the Unimaginable https://ocw.tudelft.nl/courses/image-ability-visualizing-unimaginable/ https://ocw.tudelft.nl/wp-content/uploads/ability-banner.jpg Martijn Stellingwerff https://ocw.tudelft.nl/programs/bachelor/architecture/ 2016-10-29T13:11:00 2016-11-03T14:33:14 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Open Government https://ocw.tudelft.nl/courses/open-government/ https://ocw.tudelft.nl/wp-content/uploads/Open-Government-Banner.jpg Anneke Zuiderwijk-van Eijk Marijn Janssen https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-10-22T12:03:05 2016-10-25T15:43:14 TU Delft OpenCourseWare Course https://creativecommons.org/licenses/by-nc-sa/4.0/ https://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Statica https://ocw.tudelft.nl/courses/statica/ Prof. dr. Guido Janssen https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-10-15T14:59:16 2017-03-02T20:30:46 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Engineering: Building with Nature https://ocw.tudelft.nl/courses/engineering-building-nature/ https://ocw.tudelft.nl/wp-content/uploads/download-1.jpg Prof. dr. Marcel Stive J. Slinger https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ 2016-10-10T10:38:07 2016-10-24T13:02:24 TU Delft OpenCourseWare Course https://ocw.tudelft.nl/courses/engineering-building-nature/ https://ocw.tudelft.nl/courses/engineering-building-nature/ en-gb text/html Sustainable Urban Development https://ocw.tudelft.nl/courses/sustainable-urban-development/ This MOOC is all about this integration of different fields of knowledge within the metropolitan context. https://ocw.tudelft.nl/wp-content/uploads/AMS-image.jpg Arjan van Timmeren Huub Rijnaarts Mariette Overschie Marc Spiller https://ocw.tudelft.nl/programs/bachelor/architecture/ Sustainability 2016-10-03T09:18:05 2017-01-02T12:12:02 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Data Analysis: Visualization and Dashboard Design https://ocw.tudelft.nl/courses/data-analysis-visualization-dashboard-design/ https://ocw.tudelft.nl/wp-content/uploads/dashboard.jpg Dr. Felienne Hermans https://ocw.tudelft.nl/programs/master/computer-science/ 2016-09-21T14:23:04 2016-12-15T15:34:49 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Creative Problem Solving and Decision making https://ocw.tudelft.nl/courses/creative-problem-solving-and-decision-making/ https://ocw.tudelft.nl/wp-content/uploads/creativeproblemsolvingorg.jpg Prof Alexander de Haan Els van Daalen https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-09-15T07:59:32 2016-09-21T14:46:13 TU Delft OpenCourseWare Course en-gb text/html Leadership for Engineers https://ocw.tudelft.nl/courses/leadership-for-engineers/ https://ocw.tudelft.nl/wp-content/uploads/leadershipengineersorg.jpg Prof. dr. Hans de Bruijn Pieter Ligthart Dana Krueger Surya Ramkumar Stefaan Rodts https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-09-07T11:18:44 2016-09-19T11:34:25 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Industrial Biotechnology https://ocw.tudelft.nl/courses/industrial-biotechnology/ We increasingly depend on reliable and affordable supply of energy, water, transport, telecommunication and information services to improve livability and facilitate economic development. However, today's infrastructure systems are drastically changing. They are becoming more and more web-based, interconnected and transnational, with increasingly fragmented public and private ownership, while new technologies are on their way. The capital need for investment in new infrastructures and upgrading of ageing infrastructures is tremendous. https://ocw.tudelft.nl/wp-content/uploads/industrial-biology-1.jpg Prof. dr. Isabel Arends Prof.dr.ir. Sef Heijnen Prof.dr.ir. Henk Noorman Patricia Osseweijer Prof.dr.ir. Luuk van der Wielen https://ocw.tudelft.nl/programs/master/chemical-engineering/ Sustainability 2016-07-25T13:44:03 2016-10-31T16:04:25 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Aerospace Mechanics of Materials https://ocw.tudelft.nl/courses/aerospace-mechanics-of-materials/ https://ocw.tudelft.nl/wp-content/uploads/moms4.jpg Dr. Calvin Rans Dr. Sofia Teixeira de Freitas https://ocw.tudelft.nl/programs/bachelor/aerospace-engineering/ Infrastructures and Mobility 2016-07-14T10:05:12 2016-08-08T00:22:38 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Linear Modeling https://ocw.tudelft.nl/courses/linear-modeling/ The course linear modeling delivers the skillset in linear or structural modeling that is required to solve structural problems from... https://ocw.tudelft.nl/wp-content/uploads/ae_4asm003_header-e1468432161349.jpg Ir. Sonell Shroff https://ocw.tudelft.nl/programs/master/aerospace-engineering/ 2016-07-13T19:36:37 2016-10-19T13:10:09 TU Delft OpenCourseWare Course https://creativecommons.org/licenses/by-nc-sa/4.0/ https://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Electronic Power Conversion https://ocw.tudelft.nl/courses/electronic-power-conversion/ We increasingly depend on reliable and affordable supply of energy, water, transport, telecommunication and information services to improve livability and facilitate economic development. However, today's infrastructure systems are drastically changing. They are becoming more and more web-based, interconnected and transnational, with increasingly fragmented public and private ownership, while new technologies are on their way. The capital need for investment in new infrastructures and upgrading of ageing infrastructures is tremendous. https://ocw.tudelft.nl/wp-content/uploads/Electrical_Engineering_Course_ElectronicPowerConversion.png Dr. Jelena Popović https://ocw.tudelft.nl/programs/master/electrical-engineering/ Energy 2016-07-11T16:38:04 2016-08-08T00:22:37 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Subjects https://ocw.tudelft.nl/courses/subjects/ 2016-07-11T15:59:03 2016-08-08T00:22:37 TU Delft OpenCourseWare Course en-gb text/html Circular Economy https://ocw.tudelft.nl/courses/circular-economy/ https://ocw.tudelft.nl/wp-content/uploads/circular-economy-logo.jpg Connie Bakker David Peck Ken Webster https://ocw.tudelft.nl/programs/bachelor/industrial-design-engineering/ 2016-06-15T16:04:11 2016-09-26T15:57:43 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Next Generation Infrastructures https://ocw.tudelft.nl/courses/ngi-2/ We increasingly depend on reliable and affordable supply of energy, water, transport, telecommunication and information services to improve livability and facilitate economic development. However, today's infrastructure systems are drastically changing. They are becoming more and more web-based, interconnected and transnational, with increasingly fragmented public and private ownership, while new technologies are on their way. The capital need for investment in new infrastructures and upgrading of ageing infrastructures is tremendous. https://ocw.tudelft.nl/wp-content/uploads/banner-ngi.jpg Prof.dr.ir. Margot Weijnen Prof.mr.dr. Ernst ten Heuvelhof https://ocw.tudelft.nl/programs/master/systems-engineering-policy-analysis-management/ Infrastructures and Mobility Energy 2016-06-03T11:42:43 2016-12-13T14:30:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Subjects https://ocw.tudelft.nl/courses/subjects-2/ 2016-06-03T09:19:28 2016-08-08T00:22:37 TU Delft OpenCourseWare Course en-gb text/html TULib https://ocw.tudelft.nl/courses/tulib/ https://ocw.tudelft.nl/wp-content/uploads/tulib.jpg https://ocw.tudelft.nl/programs/bachelor/information-skills/ https://ocw.tudelft.nl/programs/master/information-skills-msc/ 2016-03-09T02:58:20 2016-08-08T00:22:38 TU Delft OpenCourseWare Course en-gb text/html Information Literacy I https://ocw.tudelft.nl/courses/information-literacy-i/ This instruction follows on from the online instruction Information Literacy 1 https://ocw.tudelft.nl/wp-content/uploads/library-1.jpg https://ocw.tudelft.nl/programs/bachelor/information-skills/ 2016-03-09T02:37:24 2016-07-07T16:25:57 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Information Literacy for Master’s and PhD students https://ocw.tudelft.nl/courses/information-literacy-for-masters-and-phd-students/ This course includes links to information from the instructions for Bachelor’s students https://ocw.tudelft.nl/wp-content/uploads/library-1.jpg https://ocw.tudelft.nl/programs/master/information-skills-msc/ 2016-03-08T23:50:34 2016-08-11T11:39:22 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Information Literacy II https://ocw.tudelft.nl/courses/information-literacy-ii/ This instruction follows on from the online instruction Information Literacy 1 https://ocw.tudelft.nl/wp-content/uploads/library-1.jpg https://ocw.tudelft.nl/programs/bachelor/information-skills/ 2016-03-08T23:01:24 2016-08-08T00:23:05 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Sanitary engineering https://ocw.tudelft.nl/courses/sanitary-engineering/ Different aspects of Sanitary Engineering meet in the bathroom: purified water is used and discharged to the waste water treatment plant. This course has been awarded with the Award for Open Education Excellence in 2012. https://ocw.tudelft.nl/wp-content/uploads/Featured-Image-4.jpg Prof.dr.ir. Francois Clemens https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-03-07T20:55:58 2016-05-11T12:47:47 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Modelling https://ocw.tudelft.nl/courses/modelling/ The heart of modelling lies in identifying, understanding and quantifying these cause-and-effect relationships. https://ocw.tudelft.nl/wp-content/uploads/18318de0b5.jpg Dr. Wolf Song https://ocw.tudelft.nl/programs/bachelor/industrial-design-engineering/ 2016-03-07T16:45:12 2016-04-25T16:33:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Self Study English for Dutch Students https://ocw.tudelft.nl/courses/self-study-english-dutch-students/ This is a course for Dutch (Bachelor) students who need or want to pay some extra attention to their English language skills. https://ocw.tudelft.nl/wp-content/uploads/SelfStudyEnglish_FeaturedImage.jpg drs. Martine Swennen https://ocw.tudelft.nl/programs/bachelor/language-courses/ 2016-03-07T15:44:07 2016-07-08T15:22:55 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Inleiding Civiele Techniek https://ocw.tudelft.nl/courses/inleiding-civiele-techniek/ Het voornaamste doel van dit vak is om: Verkrijgen van overzicht van het werkterrein van de civiel ingenieur; Verkrijgen van overzicht in de verschillende vakgebieden binnen de civiele techniek; Verkrijgen van inzicht en kennis omtrent de functies, vormgeving en uitvoering van civieltechnische en infrastructurele werken; Verkrijgen van een basiskennis van de belangrijkste begrippen en technieken in de civiele techniek. https://ocw.tudelft.nl/wp-content/uploads/Inleiding_Civiele_Techniek_header.jpg Prof. ir. Frank Sanders https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Infrastructures and Mobility 2016-03-07T11:43:46 2016-05-28T14:31:31 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Development of Teaching and Active Learning https://ocw.tudelft.nl/courses/development-teaching-active-learning/ The aim of the University Teaching Qualification (UTQ) programme is to allow teachers to prove they possess the basic skills to develop and teach academic courses. https://ocw.tudelft.nl/wp-content/uploads/DevelopmentOfTeachingAndActiveLearning_featuredImage.jpg drs. Margje Grob https://ocw.tudelft.nl/programs/teacher-training/ 2016-03-07T11:37:08 2016-08-08T00:23:05 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Delft Design Guide https://ocw.tudelft.nl/courses/delft-design-guide/ The Delft Design Guide presents an overview of product design approaches and methods used in the Bachelor and Master curriculum at the faculty of Industrial Design Engineering in Delft. This course has been awarded with the Award for Open Education Excellence in 2013. https://ocw.tudelft.nl/wp-content/uploads/delft_design_approach_banner.jpg Dr.ir Annemiek van Boeijen https://ocw.tudelft.nl/programs/bachelor/industrial-design-engineering/ 2016-03-07T00:06:14 2016-05-28T14:41:47 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Aeronautical Engineering https://ocw.tudelft.nl/courses/introduction-aeronautical-engineering/ This course provides an overview of and introduction to the fundamentals of aeronautics, using the history of aviation as a story line. https://ocw.tudelft.nl/wp-content/uploads/Bachelor_Aerospace_Introduction-to-Aeronautical-Engineering.jpg Prof.dr.ir. Jacco Hoekstra https://ocw.tudelft.nl/programs/bachelor/aerospace-engineering/ Infrastructures and Mobility 2016-03-06T18:52:28 2016-05-27T13:59:25 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Diversity in Educational Settings https://ocw.tudelft.nl/courses/diversity-educational-settings/ With a yearly increase in international students/phd and staff TU Delft is becoming more and more diverse and international. The heterogeneity in the classroom requires and acute awareness of the intercultural differences of the population, the TU Delft Educational Context and the impact on the role of the teacher in the International Classroom. https://ocw.tudelft.nl/wp-content/uploads/Diversity_in_Educational_Settings_header.jpg Dr. Renate Klaasen https://ocw.tudelft.nl/programs/teacher-training/ 2016-03-06T14:53:27 2016-08-08T00:22:45 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Drinking Water Treatment 1 https://ocw.tudelft.nl/courses/drinking-water-treatment-1/ The course gives the technological backgrounds of treatment processes applied for production of drinking water. The treatment processes are demonstrated with laboratory experiments. Study goals: Knowledge of technological basics and design parameters of drinking water treatment processes https://ocw.tudelft.nl/wp-content/uploads/1280px-FEMA_-_34347_-_The_repaired_New_Orleans_Water_Treatment_Facility.jpg https://ocw.tudelft.nl/programs/master/watermanagement/ Water Health 2016-03-05T14:06:36 2016-05-17T11:17:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Ethics and Engineering https://ocw.tudelft.nl/courses/ethics-and-engineering/ During this course you will explore the ethical and social aspects and problems related to technology and to your future work as professional or manager in the design, development, management or control of technology. https://ocw.tudelft.nl/wp-content/uploads/EthicsAndEngineering-_-featuredImage.jpg Dr. David Koepsell https://ocw.tudelft.nl/programs/master/tpm-minors-electives/ 2016-03-04T16:27:51 2016-08-22T14:13:13 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Data Analysis: Take it to the MAX https://ocw.tudelft.nl/courses/data-analysis-take-it-to-the-max/ This course is for all of those struggling with data analysis. That crazy data collection from your boss? Megabytes of sensor data to analyze? Looking for a smart way visualize your data in order to make sense out of it? We’ve got you covered! This course has been awarded with the Wharton-QS gold education award in the category Regional awards Europe. https://ocw.tudelft.nl/wp-content/uploads/Data-Analysis-Take-it-to-the-MAX_banner.png Dr. Felienne Hermans https://ocw.tudelft.nl/programs/master/computer-science/ 2016-03-04T13:09:12 2016-12-15T15:36:59 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Water and Climate https://ocw.tudelft.nl/courses/introduction-water-climate/ Water is essential for life on earth and of crucial importance for society. Also within our climate water plays a major role. The natural cycle of ocean to atmosphere, by precipitation back to earth and by rivers and aquifers to the oceans has a decisive impact on regional and global climate patterns. https://ocw.tudelft.nl/wp-content/uploads/Introduction_to_Water_and_Climate_header.jpg Prof. dr. Nick van de Giesen Prof.dr.ir. Herman Russchenberg Prof. Hubert Savenije Prof. dr. Marcel Stive https://ocw.tudelft.nl/programs/master/watermanagement/ Environment Water 2016-03-04T11:54:08 2016-12-15T16:24:44 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Solving Complex Problems https://ocw.tudelft.nl/courses/solving-complex-problems/ Solving Complex Problems addresses complex multi actor systems; so called ‘spaghetti situations’ in which everything is connected to everything, and everything influences everything. Situations, for instance, in which innovative new energy technologies emerge into the existing energy system. Or new health technology, medicine, treatments or screening technologies are being developed and society has to decide about whether they should be allowed and what they may cost. This course has been awarded with the Award for Open Education Excellence in 2015 and has been shortlisted for the Wharton Awards in the category of Hybrid Learning in 2014. https://ocw.tudelft.nl/wp-content/uploads/Solving_Complex_Problems_header.jpg Prof Alexander de Haan https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-03-04T10:08:49 2016-08-10T17:08:17 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Delft Design Approach https://ocw.tudelft.nl/courses/delft-design-approach/ In our daily lives we use hundreds or even thousands of products and services. They are all designed, some with more success than others. The ‘Delft Design Approach’ is a structured approach that helps designers to tackle complex design challenges: from formulating a strategic vision, to mapping user behaviors, their needs and their environment, to developing and selecting meaningful proposals for products and services. This course has been awarded with the Award for Open Education Excellence in 2015. https://ocw.tudelft.nl/wp-content/uploads/delft_design_approach_banner.jpg Dr. Jaap Daalhuizen https://ocw.tudelft.nl/programs/bachelor/industrial-design-engineering/ 2016-03-03T22:02:20 2016-10-13T09:34:48 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Agent Based Modeling of Complex Adaptive Systems (Basic) https://ocw.tudelft.nl/courses/agent-based-modeling-of-complex-adaptive-systems-basic/ This course will provide the student with the basic insights into Complex Adaptive Systems (CAS) theory and its main modeling tool, Agent Based Modeling. Many different and seemingly contradictory properties of CAS, such as Adaptiveness and Robustness, Path dependency and Evolution, Chaos and Stability etc. will be discussed using socio-technical examples and Agent Based computer simulations. https://ocw.tudelft.nl/wp-content/uploads/TPM-Minor_Course_AgentBased.png Dr. ir. Igor Nikolic Dr.ir Ivo Bouwmans https://ocw.tudelft.nl/programs/master/tpm-minors-electives/ 2016-03-03T20:21:30 2016-08-22T14:06:07 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Breakwaters and Closure Dams https://ocw.tudelft.nl/courses/breakwaters-and-closure-dams/ Design and construction of breakwaters and closure dams in estuaries and rivers https://ocw.tudelft.nl/wp-content/uploads/featured-Image.jpg ir. Henk Jan Verhagen https://ocw.tudelft.nl/programs/master/hydraulic-engineering/ Water 2016-03-03T16:31:08 2016-08-08T00:22:49 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Agent Based Modeling of Complex Adaptive Systems (advanced) https://ocw.tudelft.nl/courses/agent-based-modeling-complex-adaptive-systems-advanced/ Building on Complex Adaptive Systems theory and basic Agent Based Modeling knowledge presented in SPM4530, the Advanced course will focus on the model development process. https://ocw.tudelft.nl/wp-content/uploads/TPM-Minor_Course_AgentBased.png Dr. ir. Igor Nikolic https://ocw.tudelft.nl/programs/master/tpm-minors-electives/ 2016-03-03T16:25:57 2016-08-08T00:22:49 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Policy Analysis of Multi-Actor Systems https://ocw.tudelft.nl/courses/policy-analysis-multi-actor-systems/ https://ocw.tudelft.nl/wp-content/uploads/PAMAS_BANNER-1.jpg Dr.ir. Bert Enserink https://ocw.tudelft.nl/programs/master/engineering-policy-analysis-3/ 2016-03-03T16:24:52 2016-08-08T00:22:49 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Credit Risk Management https://ocw.tudelft.nl/courses/introduction-credit-risk-management/ What is credit risk? Why is it so important, in modern economies, to correctly deal with it? This course combines theory with practice to answer these questions. https://ocw.tudelft.nl/wp-content/uploads/Introduction_to_Credit_Risk_Management_header.jpg Dr. Pasquale Cirillo https://ocw.tudelft.nl/programs/master/mathematics/ 2016-03-03T15:12:01 2016-08-08T00:23:02 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Empirical Research Methods https://ocw.tudelft.nl/courses/empirical-research-methods/ https://ocw.tudelft.nl/wp-content/uploads/c10a1c2ebf.jpg Dr. Willem-Paul Brinkman https://ocw.tudelft.nl/programs/master/media-knowledge-engineering/ 2016-03-03T14:37:48 2016-08-08T00:22:53 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Offshore Hydromechanics Part 1 https://ocw.tudelft.nl/courses/offshore-hydromechanics-part-1/ Basic principles: Hydrostatics, constant flow phenomena and waves https://ocw.tudelft.nl/wp-content/uploads/platform2.jpg Dr.ir. Pepijn de Jong https://ocw.tudelft.nl/programs/master/offshore-engineering/ 2016-03-02T13:31:34 2016-11-30T13:46:25 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Inleiding Watermanagement https://ocw.tudelft.nl/courses/inleiding-watermanagement/ De cursus geeft een kennismaking met infrastructuur voor Watermanagement. Voor Waterbeheer ligt de focus op ontwatering, afwatering, wateraanvoer en het ontwerpen van eenvoudige aan- en afvoersystemen. Voor Civiele gezondheidstechniek ligt de focus op Gezondheidstechniek en volksgezondheid, drinkwatervoorziening en Integraal waterbeheer. Leerdoelen: Begrip van basisopzet infrastructuur Watermanagement. Eenvoudige systemen kunnen ontwerpen. https://ocw.tudelft.nl/wp-content/uploads/Inleiding_Watermanagement_header.jpg Prof. dr. Nick van de Giesen https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Water 2016-03-01T16:56:53 2016-08-08T00:22:54 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Flitscolleges TU Delft https://ocw.tudelft.nl/courses/flitscolleges-tu-delft/ https://ocw.tudelft.nl/wp-content/uploads/Flitscollege_highschool_featured.jpg https://ocw.tudelft.nl/programs/high-school/various/ 2016-03-01T16:24:47 2016-08-08T00:22:53 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html De Delftse Leerlijn voor Scheikunde https://ocw.tudelft.nl/courses/de-delftse-leerlijn-voor-scheikunde/ Leerlingen zullen aan de hand van maatschappelijke-, chemische- en technologische vraagstukken concepten leren om een antwoord op deze vraagstukken te geven op grond van chemische argumenten. Er wordt ingestoken op nieuwe materialen, duurzaamheid, innovatieve technologie en de chemische industrie. https://ocw.tudelft.nl/wp-content/uploads/Scheikunde_Highschool_featured.jpg Bètasteunpunt Zuid-Holland https://ocw.tudelft.nl/programs/high-school/secondary-education-modules/ 2016-03-01T14:24:04 2016-09-27T10:57:30 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Pre-University Calculus https://ocw.tudelft.nl/courses/pre-university-calculus/ Mathematics is the language of Science, Engineering and Technology. Calculus is an elementary Mathematical course in any Science and Engineering Bachelor. Pre-university Calculus will prepare you for the Introductory Calculus courses by revising four important mathematical subjects that are assumed to be mastered by beginning Bachelor students. Preuniversity Calculus has been awarded with the Award for Open Education Excellence in the Open MOOC category in 2016. https://ocw.tudelft.nl/wp-content/uploads/Pre-University_Calculus_header.jpg Dr. Bart van den Dries https://ocw.tudelft.nl/programs/bachelor/technische-wiskunde/ https://ocw.tudelft.nl/programs/high-school/secondary-education-modules/ 2016-03-01T13:59:58 2016-08-08T00:22:51 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introductie in energie- en industriesystemen https://ocw.tudelft.nl/courses/introductie-energie-en-industriesystemen/ https://ocw.tudelft.nl/wp-content/uploads/Introductie_in_energie_en_industriesystemen_header.jpg Dr.ir Émile Jean Louis Chappin https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-03-01T10:14:21 2016-08-10T17:05:21 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Sustainable Development for Engineers https://ocw.tudelft.nl/courses/sustainable-dev-for-engineers/ By independent study of the book Sustainable Development for Engineers (K.F. Mulder, 2006) students acquire basic knowledge about sustainable development. https://ocw.tudelft.nl/wp-content/uploads/SDFE-Cover.jpg Dr.ir. Karel Mulder https://ocw.tudelft.nl/programs/master/sustainable-development/ Sustainability 2016-02-26T23:12:31 2016-08-08T00:22:59 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technology in Sustainable Development https://ocw.tudelft.nl/courses/tech-in-sustainable-development/ Workshops and guest lectures in the field of sustainable development take place on a boat during one full time week. https://ocw.tudelft.nl/wp-content/uploads/bg-health.jpg Ir. Gertjan de Werk https://ocw.tudelft.nl/programs/master/sustainable-development/ Sustainability 2016-02-26T23:05:46 2016-08-08T00:22:57 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technology Dynamics and Transition Management https://ocw.tudelft.nl/courses/tech-dynamics-transition-mgmt/ This version of the subject Technology Dynamics and Transition Management was tought in co-operation with the Harbin Institute of Technology in China. At the heart of this module lies a model of technology development from a social perspective, which will be applied to water problems in present-day China. https://ocw.tudelft.nl/wp-content/uploads/Tech-Dynamics-Transition-Cover.jpg Dr. Wim Ravesteijn https://ocw.tudelft.nl/programs/master/sustainable-development/ Sustainability Water 2016-02-26T22:57:32 2016-08-08T00:22:56 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Elementary Ergonomics https://ocw.tudelft.nl/courses/elementary-ergonomics/ Elementary Ergonomics is an introduction to basic physical ergonomics theory and practice for students of other - than Industrial Design Engineering of Delft University of Technology - institutes for higher learning, such as Dutch universities, universities of EU and non-EU countries, and universities of applied sciences. The course consists of the following topics: anthropometry (1D, 2D, 3D including digital human modelling), biomechanics, and comfort. Furthermore, the role of user involvement in the design process (evaluation of existing products and environments and of created concepts, models and prototypes) will be explained. Moreover, the meaning and representation of use cues in product design will be highlighted. https://ocw.tudelft.nl/wp-content/uploads/Ergonomics.jpg Ir. Marijke Dekker https://ocw.tudelft.nl/programs/bachelor/industrial-design-engineering/ Health Infrastructures and Mobility 2016-02-26T11:52:12 2016-08-10T16:54:58 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Economie en Bedrijf https://ocw.tudelft.nl/courses/economie-en-bedrijf/ Deze cursus biedt inzicht in besluitvorming en bedrijfsvoering op inleidend niveau; en biedt inzicht in de basisbegrippen van de micro- en markteconomie; Na het volgen van deze module kunt u: 1) basisbegrippen en theorieën van de micro- en markteconomie toelichten; 2) belangrijke concepten en theorieën toepassen op eenvoudige situaties; 3) elementen uit de discipline herkennen in concrete voorbeelden van besluitvorming en management. https://ocw.tudelft.nl/wp-content/uploads/Economie_en_Bedrijf_header.jpg Prof.dr. Rolf Künneke https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-02-26T11:35:15 2016-08-08T00:22:46 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Introductiecursus Technische Bestuurskunde https://ocw.tudelft.nl/courses/introductiecursus-technische-bestuurskunde/ Deze introductiemodule biedt een weergave van de introductieweek van Technische Bestuurskunde. In deze week worden colleges over vier verschillende vakgebieden gegeven. Die colleges kun je in deze introductiemodule terugvinden, met daarbij steeds een casus (praktijkvoorbeeld), waaraan je tijdens de introductiemodule werkt. Soms vind je hier uitwerkingen, soms niet. Bijvoorbeeld omdat de casus geen eenduidige uitwerking kent. Door de opnamen van de colleges te bekijken en de cases uit te werken, kun je je een beeld vormen van de opleiding. https://ocw.tudelft.nl/wp-content/uploads/Introductiecursus_Technische_Bestuurskunde_header.jpg Dr.ir Ivo Bouwmans https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-02-26T10:41:17 2016-08-08T00:23:02 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Project Maritieme industrie https://ocw.tudelft.nl/courses/project-maritieme-industrie/ De cursus 'Project Maritieme industrie' is een cursus speciaal voor beginnende studenten Maritieme Techniek. Tijdens deze cursus wordt de student bekend gemaakt met de TU Delft, met name met het onderwijsprogramma Maritieme Techniek. Er wordt gevraagd een vervoersconcept te onwikkelen, op basis van een vervoersvraag en een aantal randvoorwaarden. Hierbij behorend dient de student een scheepsconcept te ontwikkelen. De cursus is opgedeeld in 5 modules: Introductie Data verwerken en analyseren en scheepsanatomie Functioneel specificeren Genereren scheepsconcepten Exploitatieberekeningen https://ocw.tudelft.nl/wp-content/uploads/Project_Maritieme_industrie_header.jpg Ir. Robert Hekkenberg https://ocw.tudelft.nl/programs/bachelor/maritieme-techniek/ 2016-02-26T09:44:11 2016-08-10T17:03:22 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Petroleum Geology https://ocw.tudelft.nl/courses/petroleum-geology/ The goal of this course it to obtain an understanding of the systems that generate fossil hydrocarbons, principally oil and gas and to a lesser degree coal. Such insights form the basis for the successful exploration and production of these valuable natural resources. https://ocw.tudelft.nl/wp-content/uploads/Petroleum-Geology-Cover.jpg Prof. dr. Stefan Luthi https://ocw.tudelft.nl/programs/master/petroleum-engineering/ Energy 2016-02-25T23:47:24 2016-08-08T00:22:57 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html The Human Controller https://ocw.tudelft.nl/courses/the-human-controller/ "The Human Controller" presents and discusses design and evaluation issues of human-machine interaction. The focus is on understanding human perception-action couplings (limitations, preferences, adaptation) and on quantifying control behavior of humans in the direct manual control loop of vehicles, robots or other man-made tools. This course has been awarded with the Award for Open Education Excellence in 2015. https://ocw.tudelft.nl/wp-content/uploads/TheHumanController_FeaturedImage.jpg Dr. Ir. David Abbink https://ocw.tudelft.nl/programs/master/mechanical-engineering/ 2016-02-25T17:32:31 2016-08-08T00:22:47 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Educational Software https://ocw.tudelft.nl/courses/educational-software/ To achieve an understanding and practical experience of key principles, methods and theories in the area of educational software. https://ocw.tudelft.nl/wp-content/uploads/7aab4b1eca.jpg Dr. Willem-Paul Brinkman Dr. ir. Charles van der Mast https://ocw.tudelft.nl/programs/master/media-knowledge-engineering/ 2016-02-25T12:24:52 2016-08-08T00:22:52 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Hydromechanica 3 https://ocw.tudelft.nl/courses/hydromechanica-3/ Fenomenologische beschrijving van de stroming om een schip classificatie van weerstandscomponenten en parametrische methoden voor de berekening van de scheepsweerstand. Daarnaast wordt uitgelegd hoe de scheepsweerstand experimenteel bepaald kan worden. Voor scheepsschroeven wordt aangegeven hoe de complete geometrie beschreven kan worden, hoe de stuwkracht en koppel uit een parametrische beschrijving kan worden berekend m.b.v. een systematische schroevenserie en via een ideaal stromings model (actuator schijf). Een introductie in cavitatie (vorming van waterdamp gebieden) is onderdeel van de cursus. https://ocw.tudelft.nl/wp-content/uploads/Hydromechanica_3_header.jpg https://ocw.tudelft.nl/programs/bachelor/maritieme-techniek/ 2016-02-25T09:16:45 2016-08-08T00:22:43 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Problem Structuring Methods https://ocw.tudelft.nl/courses/problem-structuring-methods/ This course teaches students to conduct a systematic exploratory analysis for complex policy problems in a multi-actor environment. https://ocw.tudelft.nl/wp-content/uploads/featured-image-5.jpg Dr. ir. Leon Hermans https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-02-24T23:47:55 2016-08-10T17:06:46 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Aerospace Engineering II https://ocw.tudelft.nl/courses/introduction-aerospace-engineering-ii/ This part of the course Introduction to Aerospace Engineering is focused on two aerospace disciplines: "space and orbital mechanics" and "structures and materials". These topics are discussed in detail and will provide an understanding for both aircraft and for spacecraft/space missions. https://ocw.tudelft.nl/wp-content/uploads/Introduction-to-Aerospace-Engineering-II_o-e1456338673609.jpg Prof.dr.ir. Jacco Hoekstra https://ocw.tudelft.nl/programs/bachelor/aerospace-engineering/ Infrastructures and Mobility 2016-02-24T17:57:37 2016-08-08T00:23:01 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Hydromechanica 1 https://ocw.tudelft.nl/courses/hydromechanica-1/ In dit college wordt een introductie gegeven van een groot aantal facetten van de scheepshydromechanica en hun onderlinge samenhang zoals die later in de studie meer als geisoleerde onderwerpen aan bod komen. Behandeld worden: de hydrostatica, de geometrie beschrijving van het schip, inleiding lijnenplan, het begrip stabiliteit, de stabiliteit van drijvende lichamen, eenvoudige stabiliteit berekening bij kleine helling hoeken, de weerstand van lichamen onder water en aan het oppervlak, eenvoudige weerstand benaderings methoden voor schepen, de model wetten in de hydromechanica, de extrapolatie methode van Froude, de lift van een vleugel, de vleugel karakteristieken, de toepassing hiervan bij voortstuwing en bij scheepsschroeven, de schroef karakteristieken en een eenvoudige schroef berekening, en tenslotte de fysica van het zeilen en zeilvoortstuwing. https://ocw.tudelft.nl/wp-content/uploads/Hydromechanica_1_header.jpg Dr.ir. Pepijn de Jong https://ocw.tudelft.nl/programs/bachelor/maritieme-techniek/ 2016-02-24T11:20:30 2016-08-08T00:22:45 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Algoritmiek https://ocw.tudelft.nl/courses/algoritmiek/ This course treats various methods to design and analyze datastructures and algorithms for a wide range of problems. The most important new datastructure treated is the graph, and the general methods introduced are: greedy algorithms, divide and conquer, dynamic programming and network flow algorithms. These general methods are explained by a number of concrete examples, such as simple scheduling algorithms, Dijkstra, Ford-Fulkerson, minimum spanning tree, closest-pair-of-points, knapsack, and Bellman-Ford. Throughout this course there is significant attention to proving the correctness of the discussed algorithms. All material for this course is in English. The recorded lectures, however, are in Dutch. https://ocw.tudelft.nl/wp-content/uploads/Algoritmiek_header.png Dr. Mathijs de Weerdt https://ocw.tudelft.nl/programs/bachelor/technische-informatica/ 2016-02-24T09:59:09 2016-08-10T17:10:17 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Mechatronic System Design https://ocw.tudelft.nl/courses/mechatronic-system-design/ Mechatronic system design deals with the design of controlled motion systems by the integration of functional elements from a multitude of disciplines. It starts with thinking how the required function can be realised by the combination of different subsystems according to a Systems Engineering approach (V-model). https://ocw.tudelft.nl/wp-content/uploads/MechatronicSystemsDesign_FeaturedImage.jpg Prof. ir. Rob Munnig Schmidt https://ocw.tudelft.nl/programs/master/mechanical-engineering/ 2016-02-23T17:28:35 2016-08-08T00:22:50 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Materiaalkunde 1 https://ocw.tudelft.nl/courses/materiaalkunde-1/ De Colleges vormen de leidraad en bestaan uit 14 modules: 1. Introductie 2. Materiaaleigenschappen en -klassen 3. Materiaalkeuze in ontwerpprocessen 4. Spanning en rek 5. Anisotropie en atoom pakking 6. Cohesie energie 7. Mechanische elastische effecten 8. Materiaaloptimalisatie en plasticiteit 9. Materiaalsterkte en dislocaties 10. Materiaalsterkte manipuleren 11. Sterkte gelimiteerd ontwerpen (1) 12. Sterkte gelimiteerd ontwerpen (2) 13. Materiaalbreuk en taaiheid 14. Vermoeiing https://ocw.tudelft.nl/wp-content/uploads/Materiaalkunde_1_header.jpg Barend Thijsse https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-02-23T13:31:41 2016-08-08T00:22:48 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Bed, Bank and Shoreline Protection https://ocw.tudelft.nl/courses/bed-bank-and-shoreline-protection/ Design of shoreline protection along rivers, canals and the sea https://ocw.tudelft.nl/wp-content/uploads/featured-image-4.jpg ir. Henk Jan Verhagen https://ocw.tudelft.nl/programs/master/hydraulic-engineering/ Water 2016-02-22T22:30:30 2016-08-08T00:22:55 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Redeneren en Logica https://ocw.tudelft.nl/courses/redeneren-en-logica/ Het vak Redeneren en Logica gaat over redeneringen en hun geldigheid. Een redenering bestaat uit een aantal premissen, en een conclusie. Een redenering is geldig wanneer de conclusie altijd waar is wanneer de premissen dat zijn. Het kan, wanneer een redenering geldig is, dus niet voorkomen dat de premissen waar zijn, en de conclusie onwaar. Zo’n situatie heet een tegenvoorbeeld, en dat toont aan dat een redenering ongeldig is. Wanneer een redenering geldig is, heet hij een stelling (“theorem” in het engels), en kan men de conclusie afleiden uit de aannanme dat de premissen waar zijn. Zo’n afleiding heet een bewijs. Wanneer in wetenschappelijke literatuur een nieuwe stelling wordt gepresenteerd, zal er altijd een bewijs bij (horen te) worden gegeven. https://ocw.tudelft.nl/wp-content/uploads/Redeneren_en_Logica_header.png Dr. Tomas Klos https://ocw.tudelft.nl/programs/bachelor/technische-informatica/ 2016-02-22T15:02:40 2016-08-08T00:22:51 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Theory of Computation https://ocw.tudelft.nl/courses/theory-of-computation/ Computation Theory deals with one of the most fundamental questions in computer science: What is computing and what are the limits of what a computer can compute? Or, formulated differently: “What kind of problems can be algorithmically solved?” During the course this question will be studied. https://ocw.tudelft.nl/wp-content/uploads/Theory_of_Computation_header.png Dr. ir. Hans Tonino https://ocw.tudelft.nl/programs/bachelor/technische-informatica/ 2016-02-22T13:32:21 2016-08-08T00:22:47 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Geology I https://ocw.tudelft.nl/courses/geology-i/ The Geology 1 course is composed of three parts dedicated to general knowledge of the system Earth, tools for the 3D geometric representation of geological objects and methods and techniques for the recognition of fundamental minerals and rocks. https://ocw.tudelft.nl/wp-content/uploads/Geology_I_Header.jpg Prof. dr. Giovanni Bertotti https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ 2016-02-22T11:46:28 2016-08-08T00:22:42 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Reflection Seismics https://ocw.tudelft.nl/courses/introduction-reflection-seismics/ Introduction to seismic theory, measurements and processing of seismic data to final focussed image for geological and/or physical interpretation.This course deals with the most important aspects of reflection seismics. Theory of seismic waves, aspects of data acquisition (seismic sources, receivers and recorders), and of data processing (CMP processing, velocity analysis, stacking, migration) will be dealt with. The course will be supplemented by a practical of 6 afternoons where the students will see the most important data-processing steps via exercises (in Matlab). https://ocw.tudelft.nl/wp-content/uploads/Introduction_to_Reflection_Seismics_header.jpg Dr.ir. Guy Drijkoningen https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ 2016-02-22T09:39:19 2016-08-08T00:22:58 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Non-Linear Structural Modeling https://ocw.tudelft.nl/courses/non-linear-structural-modeling/ Non-Linear Structural Modeling covers the basics of non-linearities in the Finite Element Method (FEM), considering static and stability (buckling) analyses, and practical application thereof applied to both aerospace and non-aerospace examples. Special emphasis is put on the implementation of these non-linearities in a FEM model and any issues that might arise from incorporating these. https://ocw.tudelft.nl/wp-content/uploads/Master_Aerospace_Non-Linear-Structural-Modeling.jpg Ir. Jan Hol https://ocw.tudelft.nl/programs/master/aerospace-engineering/ Infrastructures and Mobility 2016-02-21T23:41:53 2016-08-08T00:22:48 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Statics https://ocw.tudelft.nl/courses/statics/ Statics deals with the principles of equilibrium. In this course the principles of forces and moments will be explained as well as principle of equilibrium of forces and moments. https://ocw.tudelft.nl/wp-content/uploads/Statics_FeaturedImage.jpg https://ocw.tudelft.nl/programs/bachelor/aerospace-engineering/ 2016-02-21T17:26:32 2016-08-08T00:22:47 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Hydrology of catchments, rivers and deltas https://ocw.tudelft.nl/courses/hydrology-of-catchments-rivers-and-deltas/ The course deals with the principles of hydrology of catchment areas, rivers and deltas. The students will learn: - to understand the relations between hydrological processes in catchment areas - to understand and to calculate the propagation of flood waves - to understand hydrological processes in deltas - to draft frequency analysis of extremes under different climatological conditions. https://ocw.tudelft.nl/wp-content/uploads/Hydrology_catchments_rivers_and_deltas_banner.jpg Prof. Hubert Savenije https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-20T20:48:48 2016-08-08T00:22:52 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Solar Cells https://ocw.tudelft.nl/courses/solar-cells/ Advanced semiconductor devices as a new source of energy for the 21st century, which deliver electricity directly from sunlight. The suitable semiconductor materials, device physics, and fabrication technologies for solar cells are presented. The guidelines for design of a complete solar cell system for household application are explained. The cost aspects, market development, and the application areas of solar cells are presented. https://ocw.tudelft.nl/wp-content/uploads/Solar-Cells-Cover.jpg Prof. dr. ir. Miro Zeman https://ocw.tudelft.nl/programs/master/microelectronics/ Energy 2016-02-20T15:45:11 2016-08-08T00:22:45 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Solid State Physics https://ocw.tudelft.nl/courses/solid-state-physics/ In the electrical engineering, solid-state materials and the properties play an essential role. A thorough understanding of the physics of metals, insulators and semiconductor materials is essential for designing new electronic devices and circuits. This is the objective of this course. https://ocw.tudelft.nl/wp-content/uploads/Solid-State-Physics-Cover.jpg Dr. Ryoichi Ishihara https://ocw.tudelft.nl/programs/master/microelectronics/ 2016-02-20T15:45:05 2016-08-08T00:22:44 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Structured Electronic Design https://ocw.tudelft.nl/courses/structured-electronic-design/ This course focuses on a systematic approach to the design of analog electronic circuits. https://ocw.tudelft.nl/wp-content/uploads/Structured-Elec-Design-Cover.jpg Dr. ir. Chris Verhoeven https://ocw.tudelft.nl/programs/master/microelectronics/ 2016-02-20T15:42:18 2016-05-28T14:52:51 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Urban Drainage and Watermanagement https://ocw.tudelft.nl/courses/urban-drainage-and-watermanagement/ In a series of lectures urban planners and other experts will explain on urban tasks and (recently) built urban plans for inner city interventions, for restructure and transformation locations of former harbor and industrial sites and for new locations. The focus will be on urban design methods, instruments and guidelines and on sustainable urbanism in general in order to gather knowledge on how to create future proof plans. https://ocw.tudelft.nl/wp-content/uploads/Urban_Drainage_and_Watermanagement_banner.jpg Dr. Marie-claire ten Veldhuis https://ocw.tudelft.nl/programs/master/watermanagement/ Water Infrastructures and Mobility 2016-02-20T15:38:44 2016-08-08T00:23:04 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Advanced Device Physics https://ocw.tudelft.nl/courses/advanced-device-physics/ https://ocw.tudelft.nl/wp-content/uploads/bg-health.jpg Dr. René van Swaaij https://ocw.tudelft.nl/programs/master/microelectronics/ 2016-02-20T15:38:44 2016-08-08T00:22:39 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Analog Integrated Circuit Design https://ocw.tudelft.nl/courses/analog-integrated-circuit-design/ An introductory course in analog circuit synthesis for microelectronic designers. Topics include: Review of analog design basics; linear and non-linear analog building blocks: harmonic oscillators, (static and dynamic) translinear circuits, wideband amplifiers, filters; physical layout for robust analog circuits; design of voltage sources ranging from simple voltage dividers to high-performance bandgaps, and current source implementations from a single resistor to high-quality references based on negative-feedback structures. https://ocw.tudelft.nl/wp-content/uploads/AnalogIntegratedCircuit_FeaturedImage.jpg Prof. dr. ir. Wouter Serdijn https://ocw.tudelft.nl/programs/master/microelectronics/ Energy 2016-02-19T16:55:59 2016-08-08T00:22:58 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Digital Signal Processing https://ocw.tudelft.nl/courses/digital-signal-processing/ The course treats: the discrete Fourier Transform (DFT), the Fast Fourier Transform (FFT), their application in OFDM and DSL; elements of estimation theory and their application in communications; linear prediction, parametric methods, the Yule-Walker equations, the Levinson algorithm, the Schur algorithm; detection and estimation filters; non-parametric estimation; selective filtering, application to beamforming. https://ocw.tudelft.nl/wp-content/uploads/DigitalSignalProcessing_FeaturedImage.jpg Prof.Dr.Ir. Gert Leus https://ocw.tudelft.nl/programs/master/microelectronics/ Energy 2016-02-19T15:19:17 2016-08-08T00:22:50 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Fluid Flow, Heat & Mass Transfer https://ocw.tudelft.nl/courses/fluid-flow-heat-mass-transfer/ The course "Fluid Flow, Heat and Mass Transfer," course number ta3220, is third-year BSc course in the program of Applied Earth Sciences at Delft University of Technology. Students in this class have already taken a course in "Transport Phenomena" in the second year, and "Fluid Flow Heat and Mass Transfer" is designed as a follow-up to that class, with an emphasis on topics of importance in applied earth sciences, and in particular to Petroleum Engineering, groundwater flow and mining. https://ocw.tudelft.nl/wp-content/uploads/Fluid_Flow_Heat__Mass_Transfer_header.jpg Prof. dr. William Rossen https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ 2016-02-19T12:49:08 2016-08-10T16:03:37 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Economics of Cybersecurity https://ocw.tudelft.nl/courses/economics-of-cybersecurity/ With a significant increase in high-profile data breaches and cybersecurity threats in the last couple years, it is critical for businesses to learn about the costs and investment decisions around securing their online systems. https://ocw.tudelft.nl/wp-content/uploads/EconomicsCybersecurity_FeaturedImage.jpg Prof. dr. Michel van Eeten https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-02-19T12:35:41 2016-08-08T00:23:01 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Subjects https://ocw.tudelft.nl/courses/subjects/ 2016-02-18T17:38:22 2016-08-08T00:23:01 TU Delft OpenCourseWare Course en-gb text/html Responsible Innovation https://ocw.tudelft.nl/courses/responsible-innovation/ Innovation may bring a lot of good to society, but innovation is not a good in itself. History provides many examples of new technologies that have had serious negative consequences or that simply just failed to address significant societal challenges. https://ocw.tudelft.nl/wp-content/uploads/ResponsibleInnovation_FeaturedImage.jpg Prof. dr. Jeroen van den Hoven https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-02-18T16:55:51 2016-08-10T17:07:35 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Framing https://ocw.tudelft.nl/courses/framing/ When you enter into a debate, you might be faced with frames of your opponents – and you will have to reframe the debate. This game of framing and reframing makes the debate to look like a chessboard made out of words. https://ocw.tudelft.nl/wp-content/uploads/Framing_FeaturedImage.jpg Prof. dr. Hans de Bruijn https://ocw.tudelft.nl/programs/bachelor/technische-bestuurskunde/ 2016-02-18T12:08:15 2016-08-08T00:22:45 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Lineaire Algebra 1 https://ocw.tudelft.nl/courses/lineaire-algebra-1/ Vakinhoud Leren rekenen met vectoren en matrices. De methode van rijreductie voor het oplossen van lineaire systemen. De begrippen lineair onafhankelijk, span en basis Elementaire lineaire transformaties, de begrippen surjectief en injectief. De begrippen deelruimte, basis en dimensie en voorbeelden hiervan. Eigenwaardes en eigenvectoren van een matrix. https://ocw.tudelft.nl/wp-content/uploads/Lineaire_Algebra_1_header.png Dr. Bernhard Meulenbroek https://ocw.tudelft.nl/programs/bachelor/eemcs-minors-electives/ https://ocw.tudelft.nl/programs/bachelor/technische-wiskunde/ 2016-02-18T11:56:14 2016-08-11T14:08:35 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Water Management in Urban Areas https://ocw.tudelft.nl/courses/water-management-in-urban-areas/ Master course on design and planning of the urban water management system. It deals with fluxes and processes in water and soil. https://ocw.tudelft.nl/wp-content/uploads/featured-image-3.jpg Dr. ir. Frans van de Ven https://ocw.tudelft.nl/programs/master/watermanagement/ Water Health 2016-02-18T08:41:56 2016-08-08T00:22:53 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Offshore Hydromechanics Part 2 https://ocw.tudelft.nl/courses/offshore-hydromechanics-part-2/ Part 2 of offshore hydromechanics (OE4630) involves the linear theory of calculating 1st order motions of floating structures in waves and all relevant subjects such as the concept of RAOs, response spectra and downtime/workability analysis. https://ocw.tudelft.nl/wp-content/uploads/Offshore_Hydromechanics_part_2.jpg Ir. Peter Naaijen https://ocw.tudelft.nl/programs/master/offshore-engineering/ Water Infrastructures and Mobility 2016-02-17T22:28:28 2016-05-17T11:00:19 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Hydrological Measurements https://ocw.tudelft.nl/courses/hydrological-measurements/ The course covers accuracy requirements of measurements and error propagation, interpretation of measurements, data completion, methods of hydrological measurements and measuring equipment, areal distributed observation, and design of measuring networks. https://ocw.tudelft.nl/wp-content/uploads/feature-image.jpg Dr. Gerrits Coenders https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-17T21:09:18 2016-08-08T00:22:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Integrated Water Management https://ocw.tudelft.nl/courses/integrated-water-management/ The course introduces water management issues in the Netherlands, Rhine Basin, and Volta Basin. https://ocw.tudelft.nl/wp-content/uploads/Rijn.jpg Prof. dr. Nick van de Giesen https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-17T20:17:45 2016-12-01T16:15:48 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Wiskundige structuren https://ocw.tudelft.nl/courses/wiskundige-structuren/ In dit college worden structuren uit de wiskunde behandeld, zoals natuurlijke getallen en inductie, reële getallen en volledigheid, functies en continuïteit, convergentie van getallenrijen, functierijen en getallenreeksen. Het doel hiervan is niet zozeer het leren van rekenvaardigheden in de analyse, maar meer het begrijpen van de theorie daarachter, in het bijzonder het leren omgaan met definities, stellingen en bewijzen. Hiermee wordt een stevig fundament gelegd voor verdere studie in de wiskunde. https://ocw.tudelft.nl/wp-content/uploads/Wiskundige_structuren_header.jpg Dr. Mark Veraar https://ocw.tudelft.nl/programs/bachelor/technische-wiskunde/ 2016-02-17T15:34:37 2016-04-24T23:27:40 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Caleidoscoop https://ocw.tudelft.nl/courses/caleidoscoop/ Tijdens de cursus Caleidoscoop worden verschillende aspecten belicht waarmee de eerstejaarsstudenten worden voorzien van basisvaardigheden en basiskennis die noodzakelijk zijn voor het succesvol volgen van een studie in de wiskunde. https://ocw.tudelft.nl/wp-content/uploads/Caleidoscoop_Header.jpg Dr. Klaas Pieter Hart https://ocw.tudelft.nl/programs/bachelor/technische-wiskunde/ 2016-02-17T12:39:56 2016-05-28T15:04:35 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Flight & Orbital Mechanics https://ocw.tudelft.nl/courses/flight-orbital-mechanics/ The following topics are covered: 1. Turning performance (three dimensional equations of motion, coordinate systems, Euler angles, transformation matrices) 2. Airfield performance (take-off and landing) https://ocw.tudelft.nl/wp-content/uploads/FlightOrbitalMechanics_FeaturedImage.jpg Dr. ir. Mark Voskuijl https://ocw.tudelft.nl/programs/bachelor/aerospace-engineering/ 2016-02-17T12:02:02 2016-08-08T00:23:02 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Optimaliseren in Netwerken https://ocw.tudelft.nl/courses/optimaliseren-in-netwerken/ Deze cursus bestaat uit lesmodules te gebruiken in de bovenbouw van het Havo en het VWO met als onderwerp Optimaliseren in netwerken. Het materiaal is gemaakt door een kerngroep van vwo-docenten, aangevuld met universitaire medewerkers. Docenten kunnen er invulling mee geven aan het domein “Wiskunde in wetenschap” van het vak wiskunde D. https://ocw.tudelft.nl/wp-content/uploads/Optimaliseren_in_Netwerken_header.jpg Dr. Wim Caspers https://ocw.tudelft.nl/programs/high-school/secondary-education-modules/ 2016-02-17T11:07:31 2016-05-23T15:29:03 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Instaptoets wiskunde https://ocw.tudelft.nl/courses/instaptoets-wiskunde/ Parate kennis en algebraïsche vaardigheden die onderdeel uitmaken van het Vwo wiskunde B-examenprogramma worden opgefrist. Hierbij moet gedacht worden aan het handig manipuleren van goniometrische formules, bewerkingen met logaritmen, toepassen van de kettingregel, primitiveren, oplossen van vergelijkingen, enzovoorts. https://ocw.tudelft.nl/wp-content/uploads/Instaptoets_wiskunde_header.jpg Dr. Wim Caspers https://ocw.tudelft.nl/programs/bachelor/technische-wiskunde/ 2016-02-17T09:33:52 2016-08-11T14:05:20 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Stromingsleer https://ocw.tudelft.nl/courses/stromingsleer/ Op basis van de integraal balansen worden de volgende onderwerpen van de stromingsleer behandeld: Integraal balansen in hun algemene vorm Dimensieloze kentallen, dynamische gelijkvormigheid Couette and Poiseulle stroming met toepassing op smeringstheorie Stroming door buizen, Moody diagram en verliesfactoren Integraal balans voor de grenslaag en berekening van weerstand door wrijving Stroming rond algemene lichamen, weerstand door drukkrachten, lift, instationariteit, vleugelprofielen Wrijvingsloze compressibele stromingen, isentropische stromingen, schokgolven Compressibele stromingen met wrijving in buizen Open kanaal stromingen, hydraulische sprong https://ocw.tudelft.nl/wp-content/uploads/Stromingsleer_header.jpg Prof.dr.ir. Jerry Westerweel https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-02-16T16:42:18 2016-04-24T23:29:57 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Regeltechniek https://ocw.tudelft.nl/courses/regeltechniek/ Deze cursus gaat over de representatie, analyse and regeling van lineare tijd-invariante dynamische systemen. Zowel de overdrachts functie als toestands modellen worden behandeld. Veel aandacht zal worden gegeven aan het schetsen en interpreteren van bode, root-locus en nyquist plots voor de analyse van systeem stabiliteit en feedback regeling. In dit kader worden de concepten van versterking en fase marge, statische en dynamische compensatie behandeld. De verschillende compensatie methodes die onder de aandacht worden gebracht zijn: PD-compensatie, lead compensatie, PI compensatie, lag compensatie en PID compensatie. Andere regel theoretische aspecten zoals sensitiviteits functies, robuustheid, tijdsvertraging, control en pool plaatsing van toestands beschrijvingen worden ook behandeld. Bij deze cursus gaat verder een practicum gepaard. Dit practicum is niet opgenomen in de OCW. https://ocw.tudelft.nl/wp-content/uploads/Regeltechniek_Header.jpg prof.dr. Robert Babuška https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-02-16T13:32:13 2016-08-11T13:38:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Evolving Design https://ocw.tudelft.nl/courses/evolving-design/ Ontwerpen is een combinatie van logisch redeneren en het creatief combineren van bestaande technieken om tot nieuwe, innovatieve ideeen te komen. Een goede werktuigkundig ontwerper put zijn creativiteit uit kennis van een groot aantal bestaande werktuigbouwkundige systemen. Hoe groter die kennis, hoe groter de kans dat nieuwe, innovatieve ontwerpconcepten ontstaan. Vooral kennis over niet-conventionele techniek bevordert dit creatieve ontwerpproces. https://ocw.tudelft.nl/wp-content/uploads/Evolving_Design_header.jpg Prof. Paul Breedveld https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-02-16T10:28:50 2016-05-28T15:07:34 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Spatial Tools in Water Resources Management https://ocw.tudelft.nl/courses/spatial-tools-in-water-resources-management/ The course discusses several Geopgraphical Information System (GIS) and Remote Sensing (RS) tools relevant for analysis of (problems in and aspects of) water systems. https://ocw.tudelft.nl/wp-content/uploads/Featured-image.png Dr. ir. Susan Steele-Dunne https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-15T22:25:11 2016-08-02T11:20:33 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Dredging Processes https://ocw.tudelft.nl/courses/dredging-processes/ The course focuses on 3 main dredging processes: the cutting of sand, clay and rock; the sedimentation process in hopper dredges; the breaching process. https://ocw.tudelft.nl/wp-content/uploads/offshore-dredging.jpg Dr. ir. Sape Miedema https://ocw.tudelft.nl/programs/master/offshore-engineering/ 2016-02-15T20:03:07 2016-11-30T10:55:00 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Pumping Stations and Transport Pipelines https://ocw.tudelft.nl/courses/pumping-stations-and-transport-pipelines/ Research on development of technologies and determination of the practical feasibility including such aspects as efficiency, costs and operational aspects. https://ocw.tudelft.nl/wp-content/uploads/pumpingstation.jpg https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-15T18:18:07 2016-12-05T11:50:57 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Intelligent User Experience Engineering https://ocw.tudelft.nl/courses/intelligent-user-experience-engineering/ he course Intelligent User eXperience Engineering (IUXE) is given for the master programme 'Media and Knowledge Engineering' and for students from other master programmes. The aim is to achieve an understanding and practical experience of key principles, methods and theories in the area of intelligent user experience engineering. Study Goals: Knowledge of a basic, coherent approach for developing software systems in such a way that the systems' users can accomplish their goals effectively and efficiently, and with a high level of satisfaction. https://ocw.tudelft.nl/wp-content/uploads/Intelligent-User-Experience-Engineering.jpg Prof. Dr. Mark Neerincx https://ocw.tudelft.nl/programs/master/media-knowledge-engineering/ 2016-02-15T17:19:55 2016-08-08T00:22:59 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Research Methodologies https://ocw.tudelft.nl/courses/research-methodologies/ The aim of the course is to be a research-driven preparation for the aerospace engineering MSc thesis in the final year of the MSc. It will help you prepare for the challenges of your thesis work. https://ocw.tudelft.nl/wp-content/uploads/research-methodology.jpg Dr. ir. Gillian Saunders-Smits https://ocw.tudelft.nl/programs/master/aerospace-engineering/ Infrastructures and Mobility 2016-02-15T16:20:21 2016-08-08T00:22:59 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Traffic Flow Theory and Simulation https://ocw.tudelft.nl/courses/traffic-flow-theory-simulation/ This course discusses fundamental traffic flow characteristics and traffic flow variables. Their definitions are presented, and visualization/analysis techniques are discussed and empirical facts are presented. The empirical relation between the flow variables and the bottleneck capacity analysis are discussed. Shockwave analysis and a review of macroscopic traffic flow models are presented. Traffic flow stability issues are discussed as well as numerical solution approaches. https://ocw.tudelft.nl/wp-content/uploads/TrafficFlowTS_FeaturedImage.jpg Prof.dr.ir. Serge Paul Hoogendoorn Infrastructures and Mobility 2016-02-15T12:26:37 2016-08-08T00:23:04 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Policy and Decision Models https://ocw.tudelft.nl/courses/policy-decision-models/ The course is a survey of models for analyzing and supporting design and decision-making in multi-actor settings. https://ocw.tudelft.nl/wp-content/uploads/Steve_Jobs_and_Bill_Gates_522695099.jpg Dr. Scott Cunningham https://ocw.tudelft.nl/programs/master/engineering-policy-analysis-3/ 2016-02-15T10:59:53 2016-04-25T21:17:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Wastewater Treatment https://ocw.tudelft.nl/courses/wastewater-treatment/ The course deals with background and application of various wastewater treatment technologies. Both high-tech and low-tech systems are discussed, which are applicable in industrialized and developing countries. Anaerobic treatment systems, focusing on resource recovery are extensively discussed. Modern technologies for (extensive) nutrient removal / recovery are dealt with as well as membrane techniques for wastewater treatment. https://ocw.tudelft.nl/wp-content/uploads/Wastewater_Treatment_banner.jpg Dr. ir. Merel de Kreuk https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-12T17:23:49 2016-08-08T00:22:54 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Electricity and Gas: Market Design and Policy Issues https://ocw.tudelft.nl/courses/electricity-gas-market-design-policy-issues/ European gas and electricity markets have largely been liberalized. Due to the specific physical characteristics and public interest aspects of electricity and gas, and to the fact that the networks continue to be natural monopolies, these markets require careful design. https://ocw.tudelft.nl/wp-content/uploads/ElectricityGas_featuredimage.jpg Dr.ir. Laurens de Vries https://ocw.tudelft.nl/programs/master/systems-engineering-policy-analysis-management/ Energy Environment 2016-02-12T12:18:37 2016-05-28T14:59:45 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Buckling of Structures https://ocw.tudelft.nl/courses/buckling-of-structures/ The course is concerned with the concept of structural stability. This concept is applied to discrete and continuous basic structural elements (beams, frames, plates and shells). The fundamental concepts are introduced on the basis of the governing differential equations. https://ocw.tudelft.nl/wp-content/uploads/buckling-structure-1.jpg Roeland de Breuker https://ocw.tudelft.nl/programs/master/aerospace-engineering/ Infrastructures and Mobility 2016-02-12T00:08:25 2016-08-08T00:22:57 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Non Equilibrium Thermodynamics https://ocw.tudelft.nl/courses/non-equilibrium-thermodynamics/ The course describes in a simple and practical way what non-equilibrium thermodynamics is and how it can contribute to engineering fields. It explains how to derive proper equations of transport from the second law of thermodynamics or the entropy production. The obtained equations are frequently more precise than used so far, and can be used to understand the waste of energy resources in central process units in the industry. The entropy balance is used to define the energy efficiency in energy conversion and create consistent thermodynamic models. It also provides a systematic method for minimizing energy losses that are connected with transport of heat, mass, charge and momentum. The entropy balance examines operation at the state of minimum entropy production and is used to propose some rules of design for energy efficient operation. https://ocw.tudelft.nl/wp-content/uploads/Southeast_Steam_Plant-University_of_Minnesota_CC-BY-2.0.jpg Prof. Dr. Ing. Signe Kjelstrup https://ocw.tudelft.nl/programs/master/sustainable-processes-energy/ Energy Sustainability 2016-02-11T21:55:13 2016-08-22T14:38:06 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Stochastic Evolution Equations https://ocw.tudelft.nl/courses/stochastic-evolution-equations/ At the end of the course, the student understands the basic techniques of probability theory in infinite-dimensional spaces and their applications to stochastic partial differential equations. https://ocw.tudelft.nl/wp-content/uploads/featured-image-2.jpg Prof. Dr. Jan van Neerven https://ocw.tudelft.nl/programs/master/mathematics/ 2016-02-11T21:06:16 2016-08-08T00:22:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Transportation and Spatial Modelling https://ocw.tudelft.nl/courses/transportation-and-spatial-modelling/ Objectives of modelling in transport and spatial planning. Model types. Theory of travel and locational behavior. System description of planning area. https://ocw.tudelft.nl/wp-content/uploads/Featured-Image-1.jpg Infrastructures and Mobility 2016-02-11T17:25:17 2016-08-08T00:23:03 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Offshore Wind Farm Design https://ocw.tudelft.nl/courses/offshore-wind-farm-design/ This course makes students familiar with the design of offshore wind farms in general and focuses on the foundation design in particular. The course is based on actual cases of real offshore wind farms that have been built recently or will be built in the near future. Study Goals: Those successfully completing this course will be able to work in and lead a team designing the civil works of an offshore wind farm. https://ocw.tudelft.nl/wp-content/uploads/Windmills_D1-D4_Thornton_Bank.jpg https://ocw.tudelft.nl/programs/master/offshore-engineering/ Infrastructures and Mobility Water 2016-02-11T15:54:21 2016-08-08T00:22:59 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Legal Aspects of MAS Design https://ocw.tudelft.nl/courses/legal-aspects-mas-design/ At the end of the course the student will be able to read and understand legal documents, point out relevant legal aspects when designing or assessing a project, carry out a basic check on the compatibility of a project with relevant law. https://ocw.tudelft.nl/wp-content/uploads/LegalAspectsOfMAS_featuredimage.jpg Dr.mr. Nienke Saanen https://ocw.tudelft.nl/programs/master/systems-engineering-policy-analysis-management/ Energy Environment Health 2016-02-11T15:22:52 2016-05-28T15:00:00 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Offshore Moorings https://ocw.tudelft.nl/courses/offshore-moorings/ The course treats the design of offshore mooring systems literally from the ground up: Starting with the anchor and its soils mechanics in the sea bed, via the mechanics of a single mooring line and system of lines. The course concludes by touching on other mooring concepts and the dynamic behavior of the moored object as a non-linear mechanical system. Classroom teaching is augmented by laboratory demonstrations and (when possible) a relevant excursion. https://ocw.tudelft.nl/wp-content/uploads/SBM01_CC0.jpg Dr. ir. Sape Miedema https://ocw.tudelft.nl/programs/master/offshore-engineering/ Water Infrastructures and Mobility 2016-02-10T22:22:44 2016-08-08T00:23:01 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Dredge Pumps and Slurry Transport https://ocw.tudelft.nl/courses/dredge-pumps-and-slurry-transport/ To gain knowledge about the two-phase flow, pipeline transport and pumping of sand water mixtures. https://ocw.tudelft.nl/wp-content/uploads/Featured-image.jpg Dr. Arno Talmon https://ocw.tudelft.nl/programs/master/offshore-engineering/ 2016-02-10T22:00:41 2016-08-08T00:22:56 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Offshore Hydromechanics https://ocw.tudelft.nl/courses/offshore-hydromechanics/ Offshore Hydromechanics includes the following modules: 1. Hydrostatics, static floating stability, constant 2-D potential flow of ideal fluids, and flows in real fluids. Introduction to resistance and propulsion of ships. Review of linear regular and irregular wave theory. 2. Analytical and numerical means to determine the flow around, forces on, and motions of floating bodies in waves. 3. Higher order potential theory and inclusion of non-linear effects in ship motions. Applications to motion of moored ships and to the determination of workability. 4. Interaction between the sea and sea bottom as well as the hydrodynamic forces and especially survival loads on slender structures. https://ocw.tudelft.nl/wp-content/uploads/boorplatform.jpg Ir. Peter Naaijen https://ocw.tudelft.nl/programs/master/offshore-engineering/ Water 2016-02-10T21:16:54 2016-11-30T13:28:10 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html VLSI Test Technology & Reliabillity https://ocw.tudelft.nl/courses/vlsi-test-technology-reliabillity/ This course is an introduction to the field of digital systems testing, which is an integral part of IC design and manufacturing. The topics discussed are: Importance of VLSI Testing, Test process and Automatic Test Equipment, Defects versus Fault models, Fault simulation, Logic simulation, Combinational Circuit Testing, Sequential Circuit Testing, Memory Testing, Design-for-Testability, Scan Design, Boundary Scan, Built-in-Self Test, Delay Test, Current Testing, VLSI Reliability, etc. https://ocw.tudelft.nl/wp-content/uploads/VLSI_Chip_CC-SA3.0.jpg Dr. Said Hamdioui https://ocw.tudelft.nl/programs/master/microelectronics/ 2016-02-10T13:59:03 2016-08-08T00:22:55 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Satellite Navigation https://ocw.tudelft.nl/courses/satellite-navigation/ Global Satellite Navigation Systems (GNSS), such as GPS, have revolutionized positioning and navigation. Currently, four such systems are operational or under development. They are the American GPS, the Russian Glonass, the European Galileo, and the Chinese Beidou-Compass. This course will address: (1) the technical principles of Global Navigation Satellite Systems (GNSS), (2) the methods to improve the accuracy of standard positioning services down to the millimeter accuracy level and the integrity of the systems, and (3) the various applications for positioning, navigation, geomatics, earth sciences, atmospheric research and space missions. https://ocw.tudelft.nl/wp-content/uploads/Geomatics_Course_SatelliteNavigation.png https://ocw.tudelft.nl/programs/master/geomatics/ 2016-02-10T12:08:54 2016-07-08T13:20:55 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Geo-information Technology for Crisis Management https://ocw.tudelft.nl/courses/geo-information-technology-crisis-management/ Recent natural and industrial disasters have demonstrated the use of geo-information is progressively increasing in all kind of systems for facing man-made and natural hazards. This new role of geo-information requires well-educated Geo-information specialists who understand the field/practice of crisis management. Crisis response is the most extreme phase that differs from other disaster management phases in many aspects: time is critical, dynamics of events is higher than normal, there is involvement of many people (who normally have different responsibilities), human emotions (pain, stress, panic) play an important role, infrastructure might be partially or completely destroyed, communication between different actors could be limited and even impossible, access to data and other sources of information might be obstructed, etc. These characteristics pose great challenges to geo-information professionals in providing the right information to the right people. These include real-time data acquisition techniques and processing, spatial-temporal modeling, real-time analysis, analytical visualization and simulation, real-time communication, spatial information structures and system architectures. https://ocw.tudelft.nl/wp-content/uploads/Geomatics_Course_Geo-informationTechnologyforCrisisManagement.png https://ocw.tudelft.nl/programs/master/geomatics/ 2016-02-10T11:51:00 2016-07-08T13:18:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Design of Dredging Equipment https://ocw.tudelft.nl/courses/design-of-dredging-equipment/ Dredging equipment, mechanical dredgers, hydraulic dredgers, boundary conditions, design criteria, instrumentation and automation https://ocw.tudelft.nl/wp-content/uploads/featured-image-1.jpg Dr. ir. Sape Miedema https://ocw.tudelft.nl/programs/master/offshore-engineering/ 2016-02-09T23:13:40 2016-05-11T13:52:34 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Methods and Algorithms for System Design https://ocw.tudelft.nl/courses/methods-and-algorithms-for-system-design/ System design is the central topic of this course. We move beyond the methods developed in circuit design (although we shall have interest in those) and consider situations in which the functional behavior of a system is the first object under consideration. https://ocw.tudelft.nl/wp-content/uploads/sbc_pcb.jpg dr.ir. René van Leuken https://ocw.tudelft.nl/programs/master/microelectronics/ 2016-02-09T21:25:25 2016-05-17T10:20:42 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Irrigation and Drainage https://ocw.tudelft.nl/courses/irrigation-and-drainage/ The course will discuss the objectives and functions of water management systems for irrigation and drainage purposes. https://ocw.tudelft.nl/wp-content/uploads/irrigation.jpg Dr.ir. Maurits Ertsen https://ocw.tudelft.nl/programs/master/watermanagement/ Water Environment Health 2016-02-09T18:50:16 2016-12-02T13:09:55 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Acoustic Remote Sensing and Sea Floor Mapping https://ocw.tudelft.nl/courses/acoustic-remote-sensing-and-sea-floor-mapping/ The course treats the following topics: - Relevant physical oceanography - Elements of marine geology - Underwater sound propagation - Interaction of sound with the seafloor - Principles of sonar - Underwater acoustic mapping systems - Data analysis - Applications - Current and future developments. https://ocw.tudelft.nl/wp-content/uploads/Ocean_gravity_map.jpg Dr. ir. Mirjam Snellen https://ocw.tudelft.nl/programs/master/geomatics/ Environment 2016-02-09T17:33:16 2016-07-08T13:16:32 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Public Hygiene and Epidemiology https://ocw.tudelft.nl/courses/public-hygiene-and-epidemiology/ A framework of public hygiene and epidemiology is given. Human pathology related to water and sanitation is dealt with... https://ocw.tudelft.nl/wp-content/uploads/featured-image.jpg Dr. P. Bol https://ocw.tudelft.nl/programs/master/watermanagement/ Water Health 2016-02-08T21:30:07 2016-07-28T16:01:35 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Sustainable Hydrogen and Electrical Energy Storage https://ocw.tudelft.nl/courses/sustainable-hydrogen-electrical-energy-storage/ Energy storage will be of major importance when more and more energy is produced using fluctuating renewable sources like wind and solar power. This course concerns two energy storage methods: storage in the form of the artificial fuel hydrogen, and storage in the form of batteries. In the transition to a sustainable-energy future, both hydrogen and batteries will likely play increasingly important roles. Hydrogen has the advantage of effectively limitless scale up potential while batteries have the advantage of high energy efficiency. https://ocw.tudelft.nl/wp-content/uploads/sustainable-energy-1.jpg Prof. dr. Fokko Mulder https://ocw.tudelft.nl/programs/master/sustainable-energy-technology/ Sustainability 2016-02-08T20:05:44 2016-05-28T14:59:04 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Drinking Water Treatment 2 https://ocw.tudelft.nl/courses/drinking-water-treatment-2/ This course deals with the design of drinking water treatment plants. Theory is discussed and a design exercise is made. Study goals: Understanding of design aspects and design details. https://ocw.tudelft.nl/wp-content/uploads/1280px-FEMA_-_34347_-_The_repaired_New_Orleans_Water_Treatment_Facility.jpg https://ocw.tudelft.nl/programs/master/watermanagement/ Water Health 2016-02-08T18:56:33 2016-07-28T11:28:53 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Electrical machines and drives https://ocw.tudelft.nl/courses/electrical-machines-and-drives/ The course gives an overview of different types of electrical machines and drives. Different types of mechanical loads are discussed. Maxwell's equations are applied to magnetic circuits including permanent magnets. DC machines, induction machines, synchronous machines, switched reluctance machines, brushless DC machines and single-phase machines are discussed with the power electronic converters used to drive them. https://ocw.tudelft.nl/wp-content/uploads/Electrical_Engineering_Course_Electricalmachinesanddrive.png Dr. ir. Henk Polinder https://ocw.tudelft.nl/programs/master/electrical-engineering/ 2016-02-08T18:25:49 2016-04-24T23:44:54 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Electronic Instrumentation https://ocw.tudelft.nl/courses/electronic-instrumentation/ Firstly, the detection limit in a typical instrument for measurement of an electrical quantity is determined for: offset, finite common-mode rejection, noise and interference. The dominant source of uncertainty is identified and the equivalent input voltage/current sources are calculated. Secondly, the measurement of a non-electrical quantity is discussed. In this case the detection limit should be expressed in terms of the non-electrical input parameter of interest. Issues discussed are: (cross-)sensitivities in frequently used transduction effects, non-electrical source loading and noise in the non-electrical signal domain. Coupled domain formal modeling is subsequently introduced to facilitate analytical multi-domain system analysis. Finally, the detection limit in typical applications in the mechanical, thermal, optical and magnetic signal domain are analysed, along with circuit and system techniques to maximize overall system detectivity. The tools that are introduced in the course, such as the formal modeling and the calculation of the detection limit, are applied in the mid-term project to a real-world measurement problem. https://ocw.tudelft.nl/wp-content/uploads/Electrical_Engineering_ElectronicInstrumentation.png Prof.Dr. Kofi Makinwa https://ocw.tudelft.nl/programs/master/electrical-engineering/ 2016-02-08T14:51:17 2016-11-29T11:13:27 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Structural Geology & Map Interpretation https://ocw.tudelft.nl/courses/structural-geology-map-interpretation/ The discipline of structural geology studies the architecture of the solid Earth and other planets. Rock deformation patterns are exciting features beacause of their aesthetic beauty and their economic interest to man. Knowledge of the subsurface structure is vital for the success of a variety of engineering and mineral exploration pograms. A thorough understanding of rock structures is essential for strategic planning in the petroleum and mining industry, in construction operations, in waste disposal surveys and for water exploration. Deformation structures in the country rock are important further for locallizing hazard zones, such as potential rockslide masses, ground subsidence, and seismic faults. Research activities concentrate on rock defomation structures in he shallow continental crust. https://ocw.tudelft.nl/wp-content/uploads/Structural_Geology__Map_Interpretation_header.jpg Dr. Ruud Weijermars https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ 2016-02-08T13:32:26 2016-05-28T14:22:02 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Principles of rock mechanics https://ocw.tudelft.nl/courses/principles-of-rock-mechanics/ The principles of rock mechanics explains the fundamental concepts of continuum mechanics and theology as applied in studies of rock deformation. https://ocw.tudelft.nl/wp-content/uploads/Principals_of_rock_mechanics_header.jpg Dr. Ruud Weijermars https://ocw.tudelft.nl/programs/bachelor/applied-earth-sciences/ 2016-02-08T08:57:24 2016-05-28T14:21:40 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Functional Programming https://ocw.tudelft.nl/courses/introduction-to-functional-programming/ Broadly speaking, functional programming is a style of programming in which the primary method of computation is the application of functions to arguments. Among other features, functional languages offer a compact notation for writing programs, powerful abstraction methods for structuring programs, and a simple mathematical basis that supports reasoning about programs. https://ocw.tudelft.nl/wp-content/uploads/ComputerScience_Course_FunctionalProgramming.png Dr. Erik Meijer https://ocw.tudelft.nl/programs/master/computer-science/ 2016-02-07T23:36:17 2016-05-27T15:28:08 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Advanced Structural Analysis https://ocw.tudelft.nl/courses/advanced-structural-analysis/ This course is designed to introduce students who wish to specialize in stress analysis of thin-walled structures to more advanced topics such as the analysis of statically indeterminate structures, warping, constraint stresses, shear diffusion, and elements of plate bending. https://ocw.tudelft.nl/wp-content/uploads/advanced-structure-analysis.jpg Dr. Ir. Mostafa Abdalla https://ocw.tudelft.nl/programs/master/aerospace-engineering/ Infrastructures and Mobility 2016-02-07T16:51:24 2016-05-28T14:14:44 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Meten aan water https://ocw.tudelft.nl/courses/meten-aan-water/ Dit vak gaat in op het hoe te doen van typische metingen op het vakgebied van gezondheidstechniek (waterkwaliteit), hydrologie, waterbeheer, waterbouw en vloeistofmechanica (waterkwantiteit). https://ocw.tudelft.nl/wp-content/uploads/MaW_Feature_Image.jpg Dr. Gerrits Coenders https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Water 2016-02-05T17:21:43 2016-04-28T14:20:51 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Use of Underground Space https://ocw.tudelft.nl/courses/use-of-underground-space/ Students obtain basic knowledge of the multidisciplinary aspects of the use of undergrounds space. Based on knowledge about the characteristics of several construction technologies they are able to asses their applicability in different situations. This may be different geological or physical conditions. They are able to analyze and structure the complex decision making process that is related to the use of underground space and define an integral approach. https://ocw.tudelft.nl/wp-content/uploads/UUS_Feature_Image.jpg Prof. ir. Johan Bosch https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Infrastructures and Mobility 2016-02-05T14:37:15 2016-04-20T12:34:23 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technology Dynamics for Sustainable Innovation https://ocw.tudelft.nl/courses/tech-dynamics-sus-innov/ Conducting innovative research is working on the edge of the known and the unknown. In creating new technology the result is never guaranteed. Society faces a tremendous challenge in order to develop in a more sustainable way. What role is there for technology in this process of change? How could we stimulate innovations in technological systems? Study Goals: At the end of the course the student is able to analyse dynamic processes of technological change within industrial corporations. The student is able to reflect on the societal implications of technological change and the challenges that society poses to technology and industry. The student can identify barriers for technological change and relevant issues for the organization of an industrial research function. Dr.ir. Karel Mulder https://ocw.tudelft.nl/programs/master/sustainable-development/ Sustainability 2016-02-05T14:36:58 2016-05-28T14:58:05 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html System Validation https://ocw.tudelft.nl/courses/system-validation/ The purpose of this course is to learn how to specify the behavior of embedded systems and to experience the design of a provably correct system. In this course you will learn how to formally specify requirements and to prove (or disprove) them on the behaviour. With a practical assignment you will experience how to apply the techniques in practice. https://ocw.tudelft.nl/wp-content/uploads/Computer_Science_Course_SystemValidation.png https://ocw.tudelft.nl/programs/master/computer-science/ 2016-02-05T14:15:03 2016-04-24T23:42:02 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technology for Biobased Products https://ocw.tudelft.nl/courses/technology-for-biobased-products/ Learn the basics of process design for biobased products. From feedstock to biomaterials, chemicals and biofuels. This course provides the insights and tools for biotechnological processes design in a sustainable way. https://ocw.tudelft.nl/wp-content/uploads/TechnologyforBiobasedProducts_header_CC-BY-SA-3.0-1.jpeg Prof. dr. Isabel Arends Prof.dr.ir. Sef Heijnen Prof.dr.ir. Henk Noorman Prof.dr.ir. Luuk van der Wielen https://ocw.tudelft.nl/programs/master/biotechnology/ Environment Sustainability 2016-02-05T13:23:28 2016-05-27T14:00:44 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Solar Energy https://ocw.tudelft.nl/courses/solar-energy/ In the third edition of Solar Energy, you will learn to design a complete photovoltaic system. This course introduces the technology that converts solar energy into electricity, heat and solar fuels with a main focus on electricity generation. Photovoltaic (PV) devices are presented as advanced semiconductor devices that deliver electricity directly from sunlight. The emphasis is on understanding the working principle of a solar cell, fabrication of solar cells, PV module construction and the design of a PV system. You will gain a greater understanding of the principles of the photovoltaic conversion- the conversion of light into electricity. This course has been awarded with the Award for Open Education Excellence in 2014 and shortlisted for the Wharton Award in the category for Teaching Delivery in 2014. https://ocw.tudelft.nl/wp-content/uploads/Solar_Energy_header.jpg Dr.ir. Arno Smets https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ Energy Sustainability 2016-02-05T10:02:11 2016-12-20T13:51:20 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Measurement Science https://ocw.tudelft.nl/courses/measurement-science/ This course is an introduction to measurement science. It describes the theoretical foundations and practical examples of measurement systems. The course covers the analysis of measurement problems and the specification of measurement systems. Various common sources of measurement errors and the concept of uncertainty in measurement results are introduced. Several important instruments for electrical measurements are discussed. Moreover a number of commonly-used sensors for the measurement of non-electronic quantities are introduced, as well as electronic circuits for the readout of these sensors https://ocw.tudelft.nl/wp-content/uploads/Measurement_Science_header.jpg Dr. ir. Michiel Pertijs https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2016-02-05T08:36:46 2016-07-08T12:56:55 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introduction to Drinking Water Treatment https://ocw.tudelft.nl/courses/introduction-to-drinking-water-treatment/ This course focuses on conventional technologies for drinking water treatment. Unit processes, involved in the treatment chain, are discussed as well as the physical, chemical and biological processes involved. The emphasis is on the effect of treatment on water quality and the dimensions of the unit processes in the treatment chain. After the course one should be able to recognize the process units, describe their function, and make basic calculations for a preliminary design of a drinking water treatment plant. This course has been awarded with the Award for Open Education Excellence in 2014 and has been shortlisted for the Wharton Awards for having the first online laboratory for experiments in Drinking Water Treatment in 2014. https://ocw.tudelft.nl/wp-content/uploads/Introduction_to_drinking_water_treatment_banner.jpg Prof.dr.ir. Luuk Rietveld https://ocw.tudelft.nl/programs/master/watermanagement/ Water Health 2016-02-04T20:10:49 2017-02-26T11:13:23 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Transport en planning https://ocw.tudelft.nl/courses/transport-en-planning/ In deze cursus wordt door middel van colleges, casestudies en tentamenvragen, ontwerpvraagstukken en rekenvoorbeelden behandeld op het gebied van transport en planning. https://ocw.tudelft.nl/wp-content/uploads/TP_Feature_Image.jpg Dr. ir. Rob van Nes https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Infrastructures and Mobility 2016-02-04T20:02:02 2016-08-10T16:49:17 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Process Intensification https://ocw.tudelft.nl/courses/process-intensification/ 1. Introduction to Process Intensification(PI): - sustainability-related issues in process industry; - definitions of Process Intensification; - fundamental principles and approaches of PI. 2. How to design a sustainable, inherently safer processing plant - presentation of PI case study assignments. 3. PI Approaches: - STRUCTURE - PI approach in spatial domain (incl. "FOCUS ON" guest lecture) - ENERGY - PI approach in thermodynamic domain (incl. "FOCUS ON" guest lecture) - SYNERGY - PI approach in functional domain (incl. "FOCUS ON" guest lecture) - TIME - PI approach in temporal domain (incl. "FOCUS ON" guest lecture) https://ocw.tudelft.nl/wp-content/uploads/Chemical_Engineering.png Dr. Georgios Stefanidis https://ocw.tudelft.nl/programs/master/chemical-engineering/ 2016-02-04T17:57:49 2016-04-24T23:38:06 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Civil Engineering in Developing Countries https://ocw.tudelft.nl/courses/civil-engineering-developing-countries/ Based on working on exercises on project decision making and planning, the specific context of working abroad in general and in developing countries in particular is illustrated, with regard to socio-cultural aspects, planning and financing of projects, roles of (consulting) engineers and contractors, local materials, techniques and knowledge and environmental issues. https://ocw.tudelft.nl/wp-content/uploads/civil-eng.jpg Dr.ir. Maurits Ertsen https://ocw.tudelft.nl/programs/master/watermanagement/ Water 2016-02-04T17:57:48 2016-12-01T13:48:27 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Inleiding Bouwmaterialen en Environmental Engineering https://ocw.tudelft.nl/courses/inleiding-bouwmaterialen-en-environmental-engineering/ Dit college behandelt duurzame ontwikkeling in de bouw en civieltechnische werken mede in combinatie met het gebruik van bouwmaterialen. https://ocw.tudelft.nl/wp-content/uploads/IBEE_Feature_Image.jpg https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Infrastructures and Mobility Sustainability 2016-02-04T17:01:25 2016-08-08T00:22:40 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Hydrologie https://ocw.tudelft.nl/courses/hydrologie/ Kennis van de hydrologische kringloop met bijbehorende fysische processen. De processen kunnen kwantificeren m.b.v. fysische basiswetten. Grootschalige processen kwantificeren m.b.t. empirische relaties. Toepassing van rekenregels en rekenmethodieken op praktische problemen. Kennis van de samenhang tussen waarnemen (meten) en modelleren. https://ocw.tudelft.nl/wp-content/uploads/Hydro_Feature_image.jpg Prof. Hubert Savenije https://ocw.tudelft.nl/programs/bachelor/civiele-techniek/ Water 2016-02-04T14:19:12 2016-08-08T00:22:39 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Ontwerpproject deel 2: stedenbouwkundig project https://ocw.tudelft.nl/courses/ontwerpproject-deel-2-stedenbouwkundig-project/ De opgave voor het stedenbouwkundig ontwerp is een nieuw in te richten locatie in Rotterdam Zuid met een programma van minimaal 200 woningen en andere bestemmingen, met daarin een nieuw te ontwerpen oever/kade /waterfront aan nieuw te ontwerpen of bestaand water. In het voorgaande kwartaal heeft de student alle elementen geleerd of onderzocht om zelfstandig een plan te maken voor een eigen gekozen locatie: – te herontwerpen havengebied (rand Waalhaven) – Charlois herstructuring in de vorm van meer water in de wijk en/of nieuwe rand aan het Zuiderpark – verdichting plan Wielewaal – stadsrand aan Zuidwijk nabij het Zuidelijk randpark – lege locaties aan de Linker Maasoever https://ocw.tudelft.nl/wp-content/uploads/OO1_Feature_Image.jpg Ir. Evelien Brandes https://ocw.tudelft.nl/programs/bachelor/architecture/minor-stedenbouw-de-delta/ https://ocw.tudelft.nl/programs/bachelor/architecture/ Environment Infrastructures and Mobility Water 2016-02-04T14:06:05 2016-04-28T14:01:34 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Cavitation on Ship Propellers https://ocw.tudelft.nl/courses/cavitation-ship-propellers/ Two cavitating leading edge vortices emanating from a sheet cavity in the region of a propeller tip. These types of cavitation are responsible for broadband pressure fluctuations radiated from a propeller. https://ocw.tudelft.nl/wp-content/uploads/Cavitation-Ship-Prop-Featured-Image.jpg https://ocw.tudelft.nl/programs/master/marine-technology/ Water 2016-02-04T13:54:42 2016-05-11T13:47:49 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Ontwerpproject deel 1: analyse stadsregio https://ocw.tudelft.nl/courses/ontwerpproject-deel-1-analyse-stadsregio/ In het eerste kwartaal van de minor maken de studenten in groepjes een regioplan met betrekking tot water en verstedelijking. Studiegebied is Rotterdam Zuid, gelegen op het eiland IJsselmonde tussen oude Maas en Nieuwe Maas, dat onderdeel is van de Zuidwestelijke Delta, met de focus op het middendeel van het stedelijk gebied van Rotterdam Zuid vanaf Maasoever met de havens en de Kop van Zuid, het vooroorlogs- en naoologs gebied rond het Zuiderpark. Naar het Zuiden over de A15 en Carnisselande en naar het westen de havengebieden rond de Waalhaven met Heijplaat en Eemhaven. https://ocw.tudelft.nl/wp-content/uploads/OO1_Feature_Image.jpg Ir. Evelien Brandes https://ocw.tudelft.nl/programs/bachelor/architecture/minor-stedenbouw-de-delta/ https://ocw.tudelft.nl/programs/bachelor/architecture/ Environment Infrastructures and Mobility Water 2016-02-04T13:44:53 2016-05-28T14:26:15 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Digitale Systemen https://ocw.tudelft.nl/courses/digitale-systemen/ Het vak Digitale Systemen laat de eerstejaarsstudent kennis maken met de verscheidenheid aan specificatietechnieken en synthese bij het ontwerp van digitale systemen. Onderwerpen die worden behandeld zijn o.a.: getalstelsels, Booleaanse algebra, 2-level en multi-level netwerken, minimalisatietechnieken/tools, timing, hazards; sequentiële systemen, Moore/Mealy machines, FSM; specificatie, modellering, simulatie en synthese m.b.v. VHDL; datapad besturingsmodel, synthesemethodieken en tools, realisatie m.b.v. FPGAs. https://ocw.tudelft.nl/wp-content/uploads/Digitale_Systemen_header.jpg Dr. ir. Arjan van Genderen https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2016-02-04T13:40:58 2016-04-24T22:55:40 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html System Identification and Parameter Estimation https://ocw.tudelft.nl/courses/system-identification-and-parameter-estimation/ Analysis of unknown dynamic systems in the time-domain and the frequency domain. Application to relation between transfer functions and spectral densities in open-loop and closed-loop systems. Modelling of systems: Choice of model structure and parametrisation. Linear and non-linear model structures Parameter estimation by optimization Optimization techniques: Gradient methods, random-search methods, genetic algorithms. Experimental validation of models: Coherence, Variance-Accounted-For (VAF). Special non-linear model structures: Expert systems, neural networks, fuzzy models. https://ocw.tudelft.nl/wp-content/uploads/Biomedical_Engineering_BiomedicalEngineeringDesign.png Dr. Erwin de Vlugt https://ocw.tudelft.nl/programs/master/biomedical-engineering/ Health 2016-02-04T11:37:10 2016-08-08T00:22:39 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Programmeren in C https://ocw.tudelft.nl/courses/programmeren-in-c/ In dit vak leert de student programmeren in een procedurele programmeertaal en wel in C. Aan de orde komen onder meer: fundamentele programmeerconstructies (datatypen, toekennings-, keuze-, en herhalingsopdrachten), procedurele abstractie (methoden en parameters) en data-abstractie (arrays, structures). Verder wordt behandeld: het gebruik van dynamische datastructuren zoals lijsten en binaire bomen, het lezen en schrijven van files en het gebruik van een compiler. Ter illustratie zullen een aantal algoritmen worden behandeld zoals priemgetallen generatie, grootste gemene deler en sorteren. https://ocw.tudelft.nl/wp-content/uploads/Programmeren_in_C_header.jpg Dr. ir. Arjan van Genderen https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2016-02-04T11:32:24 2016-04-24T22:54:58 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Elektronische signaalbewerking II https://ocw.tudelft.nl/courses/elektronische-signaalbewerking-ii/ Elektronische signaalbewerking II behandelt gesampeld-analoge en vooral continue-tijd analoge circuits en systemen. https://ocw.tudelft.nl/wp-content/uploads/Elektronische_signaalbewerking_II_header.jpg Prof. dr. ir. Wouter Serdijn https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2016-02-03T21:43:55 2016-04-28T14:44:19 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Advanced Solid State Physics https://ocw.tudelft.nl/courses/advanced-solid-state-physics/ Thermal conductivity, the Wiedemann-Franz law and the collision integral for electron-electron scattering. https://ocw.tudelft.nl/wp-content/uploads/ghanta.png Prof.dr. Yaroslav Mikhaylovich Blanter https://ocw.tudelft.nl/programs/master/applied-physics/ 2016-02-03T16:40:22 2016-05-28T14:23:08 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Introductie: Minor Stedenbouw in de Delta https://ocw.tudelft.nl/courses/introductie-minor-stedenbouw-in-de-delta/ Om de vakken binnen deze minor te kunnen volgen, dien je te beschikken over bepaalde voorkennis. Zo vind je hier bijvoorbeeld Stedenbouwkundige kernbegrippen, Kaartmateriaal en Literatuur. Daarnaast vind je binnen iedere cursus het lesmateriaal dat je specifiek voor die cursus nodig hebt. https://ocw.tudelft.nl/wp-content/uploads/IMSID_Feature_Image.jpg https://ocw.tudelft.nl/programs/bachelor/architecture/minor-stedenbouw-de-delta/ Environment 2016-02-03T16:28:42 2016-08-11T15:52:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Electrical Power Drives https://ocw.tudelft.nl/courses/electrical-power-drives/ This course focuses on the following topics: electrical system of an electric car, generators, electrical machines, induction motors, synchronous motors and generators, power converters, power supplies. https://ocw.tudelft.nl/wp-content/uploads/Electrical_Power_Drives_Header.jpg Dr.eng. Pavol Bauer https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2016-02-03T15:26:06 2016-05-28T14:35:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Stedenbouwkundige Ontwerpmethode https://ocw.tudelft.nl/courses/stedenbouwkundige-ontwerpmethode/ Deze module bevat 9 lezingen uit de collegereeks ‘Stedenbouwkundige ontwerpmethoden’. De slides kunnen bekeken worden op de pagina of kunnen gedownload worden als pdf-file. Onder ‘Readings’ in het menu worden suggesties voor literatuur gegeven ter aanvulling op de informatie die in de lezingen gegeven wordt. Sommige lezingen gaan specifiek in op stedenbouw als opgave en de ontwerpmethoden (o.a. lezingen 1 over de veranderende opgave van stedenbouw en lezing 7 over de basisprincipes van het stedenbouwkundig ontwerpen), andere lezingen gaan dieper in op een bepaald gebied (o.a. Lezing 4 over de Kop van Zuid, Rotterdam en lezing 8 over Ijburg). Het thema water in relatie tot het stedenbouwkundig ontwerp staat in de meeste lezingen centraal. https://ocw.tudelft.nl/wp-content/uploads/SO_Erasmusbrug_Feature_Image.jpg Ir. Evelien Brandes https://ocw.tudelft.nl/programs/bachelor/architecture/minor-stedenbouw-de-delta/ https://ocw.tudelft.nl/programs/bachelor/architecture/ Environment 2016-02-03T15:21:09 2016-04-28T14:02:32 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Biomedical Engineering Design https://ocw.tudelft.nl/courses/biomedical-engineering-design/ In biomechanical engineering, the design specifications are fundamentally different from those in industry. Typically, precise motion is much less critical than safety, force transmission or distribution, and energy-efficiency. Hence, a different design approach is needed. This course presents a design philosophy and a design approach, dedicated to rehabilitation technology. This field was selected because of human-machine interaction is inherent and vital. Illustrative examples will be discussed by their entire design proces (system analysis, design approach, topology synthesis, system alternatives and improvements, dimensional optimization, choice of components). Topics addressed include: arm and hand prosthetics, arm orthotics and exoskeletons, control of prosthetics and orthotics, transmission of forces, influence of visco-elastic materials on the behaviour of mechanical systems, static balancing, pneumatics, low-friction mechanisms, medical terminology. Students will select a design assignment and perform a problem analysis, generate conceptual designs, and select a feasible one. The assignment will be carried out in groups of around two students, where possible from different faculties, and is completed with a presentation and a report. https://ocw.tudelft.nl/wp-content/uploads/Biomedical_Engineering_BiomedicalEngineeringDesign.png Dr. Dick Plettenburg https://ocw.tudelft.nl/programs/master/biomedical-engineering/ Health 2016-02-03T15:06:44 2016-04-26T11:46:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technics and Future https://ocw.tudelft.nl/courses/technics-and-future/ Companies and governments have to decide upon technological strategies, i.e. which products are to be developed and which processes and infrastructures are required for the future. Several tools to consider technological strategies are dealt with in this course. https://ocw.tudelft.nl/wp-content/uploads/MS_Technics_and_Future.jpg Dr.ir. Karel Mulder https://ocw.tudelft.nl/programs/master/sustainable-development/ Sustainability 2016-02-03T14:54:38 2016-05-28T14:56:28 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Mesoscopic Physics https://ocw.tudelft.nl/courses/mesoscopic-physics/ Mesoscopic physics is the area of Solid State physics that covers the transition regime between macroscopic objects and the microscopic, atomic world. https://ocw.tudelft.nl/wp-content/uploads/Meso-Phy-Image.jpg Prof.dr.ir. Herre van der Zant https://ocw.tudelft.nl/programs/master/applied-physics/ 2016-02-03T12:48:25 2016-05-28T14:23:32 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Thermodynamica 2 https://ocw.tudelft.nl/courses/thermodynamica-2/ De thermodynamische relaties voor compressibele stoffen en de fasendiagrammen voor pure stoffen worden behandeld. Enkele voorbeelden van toestandsvergelijkingen worden behandeld (de viriaal vergelijking, vergelijkingen met twee constanten en vergelijkingen met meerdere constanten). De grootheden Helmholtz energie en Gibbs energie worden geintroduceerd. De Gibbs vergelijking is de basis om tot een beschrijving van evenwichten (van mengsels) te komen. De condities van evenwicht van pure componenten en van mengsels wordt afgeleidt. Uitgaande van de totale differentialen worden partiele afgeleide uit gedrukt in termen van thermodynamische grootheiden. Voor de berekening van processen, zo als compressie, expansie enz worden uitdrukkingen afgeleid voor delta h, delta s en delta u (waarbij delta voor de deviatie="departure" van ideaal gas gedrag staat). Het wordt getoond hoe deze uitdrukkingen (of dimensieloze diagrammen van deze grootheden) voor de berekening van processen gebruikt kunnen worden. Ook wordt de grootheid exergie gepresenteerd, een grootheid die gebaseerd is op de tweede hoofdwet van de thermodynamica, tezamen met enkele nuttige grootheden en hulpmiddelen voor het uitvoeren van exergie analyses (exergie verlies, exergie rendementen, waardediagram). In dit college wordt de definitie van exergie beperkt tot de thermo-mechanische exergie. Het principe van het stoomturbine kringproces wordt getoond en mogelijkheden voor de optimalisatie van dit kringproces worden besproken, zoals de keuze van stoomdruk en -temperatuur en de toepassing van stoomoververhitting en -herverhitting. https://ocw.tudelft.nl/wp-content/uploads/Thermodynamica_1_header.jpg Prof.dr.ir. Thijs Vlugt https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-02-03T12:06:29 2016-08-11T13:59:33 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Ways to Study https://ocw.tudelft.nl/courses/ways-to-study/ This course will focus on this integrated concept, the learning of how to successfully make and publish your own website. In 6 lectures the several aspects of traditional scientific research will be treated by using the contemporary media. The course has the following study goals, that correspond with the given assignments and lectures: https://ocw.tudelft.nl/wp-content/uploads/WTS_Featured_Image.jpg Prof.dr.ir. Taeke de Jong https://ocw.tudelft.nl/programs/bachelor/architecture/ 2016-02-03T11:51:05 2016-05-28T14:28:33 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Advanced Design and Optimization of Composite Structures I https://ocw.tudelft.nl/courses/advanced-design-optimization-composite-structures/ This course introduces the basic components of an airframe structure and discusses their use and limitations. The realities of composite design such as the effect of material scatter, environmental knockdowns, and damage knockdowns are discussed and guidelines accounting for these effects and leading to robust designs are presented. https://ocw.tudelft.nl/wp-content/uploads/80279508_80bdb4bcf7_o-1.jpg Dr. Christos Kassapoglou Dr. Ir. Mostafa Abdalla https://ocw.tudelft.nl/programs/master/aerospace-engineering/ Infrastructures and Mobility 2016-02-03T10:46:10 2016-08-08T00:22:40 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Sun, Wind, Water, Earth, Life, Living https://ocw.tudelft.nl/courses/sun-wind-water-earth-life-living/ The course aims is to understand the relation between urban design and planning and the aspects of: - sun, energy and plants - wind, sound and noise - water, traffic and other networks - earth, soil and site preparation - life, ecology and nature preservation - living, human density, economy and environment. https://ocw.tudelft.nl/wp-content/uploads/SWWEL_Feature_img.jpg Prof.dr.ir. Taeke de Jong https://ocw.tudelft.nl/programs/bachelor/architecture/ Environment 2016-02-02T17:36:56 2016-08-08T00:22:41 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Thermodynamica 1 https://ocw.tudelft.nl/courses/thermodynamica-1/ Doelstelling van dit college is een introductie te geven in de theorie van de Thermodynamica, een van de fundamentele werktuigbouwkunde vakken. De Thermodynamica behandelt energie vraagstukken en relaties tussen de eigenschappen van materialen. In dit college wordt voor een ingenieurs aanpak van de Thermodynamica gekozen: onderwerp van studie zijn systemen en hun interactie met de omgeving. Naast gesloten systemen krijgen open systemen veel aandacht. Thermodynamica wordt, in combinatie met stromingsleer en warmte- en stofoverdracht, ingezet om bijvoorbeeld automotoren, turbines, compressoren, pompen, elektriciteit opwekkinginstallaties, cryogenische-, koel- en klimaat-installaties en duurzame energieconversie installaties te analyseren en ontwerpen. De beginselen van de Thermodynamica maken het mogelijk om de ontwerpen van energie gerelateerde werktuigbouwkundige apparaten en systemen te optimaliseren voor het betreffende doel. https://ocw.tudelft.nl/wp-content/uploads/Thermodynamica_1_header.jpg Prof.dr.ir. Bendiks Jan Boersma https://ocw.tudelft.nl/programs/bachelor/werktuigbouwkunde/ 2016-02-02T17:00:55 2016-04-28T15:17:34 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Quantum Information Processing https://ocw.tudelft.nl/courses/quantum-information-processing/ Quantum Information Processing aims at harnessing quantum physics to conceive and build devices that could dramatically exceed the capabilities of today's "classical" computation and communication systems. https://ocw.tudelft.nl/wp-content/uploads/QIP-Image-e1454427976425.jpg Prof. dr. Lieven Vandersypen https://ocw.tudelft.nl/programs/master/applied-physics/ 2016-02-02T17:00:37 2016-05-28T14:24:01 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Landschap en Water https://ocw.tudelft.nl/courses/landschap-en-water/ Deze cursus bestaat uit 8 colleges en literatuur. Doel is inzicht te krijgen in het Nederlandse watersysteem en dijken – en polderlandschap. Het watersysteem is een dynamisch complex van regenwater, rivieren en zeeïnvloeden. https://ocw.tudelft.nl/wp-content/uploads/Course_Landschap_en_water_Featured_Img.jpg Ir. Evelien Brandes https://ocw.tudelft.nl/programs/bachelor/architecture/ https://ocw.tudelft.nl/programs/bachelor/architecture/minor-stedenbouw-de-delta/ Environment Water 2016-02-02T16:55:34 2016-05-28T14:25:35 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Bouwen in/op/aan het water https://ocw.tudelft.nl/courses/bouwen-in-op-aan-water/ Het doel van deze cursus is inzicht te krijgen in het civieltechnische aspecten van bouwen in het Nederlandse deltalandschap. In de lezingen wordt aandacht besteed aan het onderscheid tussen de verschillende typen van kaden, dijken en waterkerende constructies. Tevens staan de vragen centraal als: Kunnen gebouwen en woningen ook waterkerend zijn? En: hoe kan men verantwoord bouwen op een dijk? Grondwater, terreinhoogte en bouwrijp maken, nieuwe wijzen van funderen, al dan niet kruipruimten, kelders en souterrains komen aan de orde. In de lezingen worden zowel principes als voorbeelden van constructies en waterfronten uiteengezet. Actuele plannen worden daarbij getoond. https://ocw.tudelft.nl/wp-content/uploads/Bouw_Water_Header.jpg Ir. Evelien Brandes https://ocw.tudelft.nl/programs/bachelor/architecture/ https://ocw.tudelft.nl/programs/bachelor/architecture/minor-stedenbouw-de-delta/ Water Environment 2016-02-02T16:04:40 2016-05-28T14:24:48 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Bio Inspired Design https://ocw.tudelft.nl/courses/bio-inspired-design/ The course Bio-Inspired Design gives an overview of non-conventional mechanical approaches in nature and shows how this knowledge can lead to more creativity in mechanical design and to better (simpler, smaller, more robust) solutions than with conventional technology. The course discusses a large number of biological organisms with smart constructions, unusual mechanisms or clever sensing and processing methods and presents a number of technical examples and designs of bio-inspired instruments and machines. https://ocw.tudelft.nl/wp-content/uploads/BID.jpg Prof. Paul Breedveld https://ocw.tudelft.nl/programs/master/biomechanical-design/ Health 2016-02-02T14:15:09 2016-05-17T10:06:00 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Bio mechatronics https://ocw.tudelft.nl/courses/bio-mechatronics/ Biomechatronics is a contraction of biomechanics and mechatronics. In this course the function and coordination of the human motion apparatus is the central focus, and the design of assistive devices for the support of the function of the motion apparatus. Examples are assistive devices like an orthosis, prosthesis or Functional Electrical Stimulation of muscles. The goal is to provide some function to patients with functional deficiencies. https://ocw.tudelft.nl/wp-content/uploads/Biomedical_Engineering_Biomechatronics.png Dr. Dick Plettenburg https://ocw.tudelft.nl/programs/master/biomedical-engineering/ Health 2016-02-02T14:12:12 2016-04-26T11:45:01 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Lineaire schakelingen https://ocw.tudelft.nl/courses/lineaire_schakelingen/ Dit vak gaat over het berekenen van spanningen, stromen en vermogens in elektrische circuits met bronnen, weerstanden, spoelen en condensatoren. In het eerste deel worden de componenten geïntroduceerd en de basisberekeningsmethoden aangeleerd. In het tweede deel worden de technieken uit het eerste deel toegepast op tweede-orde circuits, circuits met sinusvormige spanningen en stromen, magnetisch gekoppelde circuits en vermogenscircuits. Verder is er veel aandacht voor filters, frequentieresponsies, tweepoorten en de Laplace transformatie. https://ocw.tudelft.nl/wp-content/uploads/Lineaire_Schakelingen_featured.jpg Prof. dr. ir. Wouter Serdijn https://ocw.tudelft.nl/programs/bachelor/electrical-engineering/ 2016-02-02T11:50:17 2016-07-08T12:55:16 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ nl-nl text/html Introduction to Aerospace Engineering I https://ocw.tudelft.nl/courses/introduction-aerospace-engineering/ This first part of the course Introduction to Aerospace Engineering presents an overall picture of the aeronautics domain. This overview involves a number of different perspectives on the aerospace domain, and shows some basic principles of the most important concepts for flight. Then the basic aerodynamics are covered, followed by flight mechanics. During the OCW Global 2013 conference Introduction to Aerospace Engineering I was awarded with the Award for OpenCourseWare Excellence in the category of best multimedia course. https://ocw.tudelft.nl/wp-content/uploads/Course_Aerospace_Engineering_1.jpg Prof.dr.ir. Jacco Hoekstra https://ocw.tudelft.nl/programs/bachelor/aerospace-engineering/ Infrastructures and Mobility 2016-02-02T11:45:13 2016-05-28T14:10:43 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technology and Global Development https://ocw.tudelft.nl/courses/tech-and-global-dev/ Companies and governments have to decide upon technological strategies, i.e. which products are to be developed and which processes and infrastructures are required for the future. Several tools to consider technological strategies are dealt with in this course. https://ocw.tudelft.nl/wp-content/uploads/MS_Technology_in_Global_Dev.jpg Dr. Wim Ravesteijn https://ocw.tudelft.nl/programs/master/sustainable-development/ 2016-02-02T11:22:34 2016-08-08T00:22:40 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html Technology Development and Impact Assessment https://ocw.tudelft.nl/courses/technology-development-impact-assessment/ The course gives knowledge of and insight into (1) technology development from a societal perspective, (2) a wide range of impact assessment procedures and methods to assess and regulate the potential impact of technological projects, programmes and technology policies, and (3) ethical theories and tools to judge and manage social consequences of these initiatives. https://ocw.tudelft.nl/wp-content/uploads/1-11.jpg Dr. Wim Ravesteijn https://ocw.tudelft.nl/programs/master/engineering-policy-analysis-3/ Environment Sustainability 2016-02-01T14:29:47 2016-07-08T13:04:59 TU Delft OpenCourseWare Course http://creativecommons.org/licenses/by-nc-sa/4.0/ http://creativecommons.org/licenses/by-nc-sa/4.0/ en-gb text/html